CP10.361 Datasheet, PDF (1/27 Pages) PULS GmbH – SINGLE PHASE INPUT

CP-Series
CP10.361
36V, 6.7A, SINGLE PHASE INPUT
POWER SUPPLY
ƒ AC 100-240V Wide-range Input
ƒ Width only 39mm
ƒ Efficiency up to 95.4%, Excellent Partial Load Efficiency
ƒ 20% Output Power Reserves
ƒ Safe Hiccup^PLUS Overload Mode
ƒ Active Power Factor Correction (PFC)
ƒ Minimal Inrush Current Surge
ƒ Full Power Between -25°C and +60°C
ƒ DC-OK Relay Contact
ƒ Meets ITE, ATEX, Class I Div2 and SEMI F47 Requirements
ƒ 3 Year Warranty
GENERAL DESCRIPTION
The DIMENSION CP-Series units are high-end power
supplies in a medium price range without compromising
quality, reliability and performance. The CP-Series is
part of the DIMENSION power supply family. The most
outstanding features of CP10.361 are the high
efficiency, advanced inrush current limitation, active PFC
and the wide operational temperature range.
The CP-Series includes all the essential basic functions.
The devices have a power reserve of 20% included,
which may even be used continuously at temperatures
up to +45°C. Additionally, the CP10 can deliver three
times the nominal output current for at least 12ms
which helps to trip fuses on faulty output branches.
High immunity to transients and power surges as well as
low electromagnetic emission, a DC-OK relay contact
and a large international approval package for a variety
of applications makes this unit suitable for nearly every
situation.
SHORT-FORM DATA
Output voltage DC 36V
Adjustment range 36 – 42V
Output current 6.7A
at 36V, amb <60°C
8.0A
at 36V, amb <45°C
5.7A
at 42V, amb <60°C
6.9A
at 42V, amb <45°C
Output power
240W / 288W at <60°C / <45°C
Output ripple
< 50mVpp
20Hz to 20MHz
AC Input voltage AC 100-240V -15%/ +10%
Mains frequency 50-60Hz
±6%
AC Input current 2.16 / 1.13A
at 120 / 230Vac
Power factor
0.99 / 0.97
at 120 / 230Vac
AC Inrush current 6 / 9A pk
at 40°C 120/230Vac
DC Input
DC 110-150V ^±20%
Efficiency
93.8 / 95.4%
at 120 / 230Vac
Losses
15.9 / 11.6W
at 120 / 230Vac
Temp. range
-25°C to +70°C operational
Derating
6W/°C
+60 to +70°C
Hold-up time
38 / 38ms
at 120 / 230Vac
Dimensions
39x124x117mm WxHxD
Weight
600g / 1.3lb
ORDER NUMBERS
Power Supply CP10.361
Accessory
ZM12.SIDE
YR2.DIODE
YR40.242
36-42V Unit
Side mount bracket
Diode Redundancy
module
MOSFET Redundancy
module
MARKINGS
IND. CONT. EQ.
UL 508
UL 60950-1
EMC, LVD, ATEX
Class I Div 2
planned
IECEx
ATEX
II 3G Ex nA nC II T4 Gc ^{Marine.planned}
Nov. 2015 / Rev. 1.0 DS-CP10.361-EN
All parameters are specified at 36V, 6.7A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
1/27