CP10.241 Datasheet, PDF (1/27 Pages) PULS GmbH – SINGLE PHASE INPUT

CP-Series
CP10.241, CP10.242, CP10.241-S1
24V, 10A, SINGLE PHASE INPUT
POWER SUPPLY
ƒ AC 100-240V Wide-range Input
ƒ Width only 39mm
ƒ Optional with Spring-clamp Terminals (CP10.241-S1)
ƒ Optional with Extended DC Input Range (CP10.242)
ƒ Efficiency up to 95.2%, Excellent Partial Load Efficiency
ƒ 20% Output Power Reserves
ƒ Safe Hiccup^PLUS Overload Mode
ƒ Easy Fuse Breaking due to High Overload Peak Current
ƒ Active Power Factor Correction (PFC)
ƒ Minimal Inrush Current Surge
ƒ Full Power Between -25°C and +60°C
ƒ DC-OK Relay Contact
ƒ Meets ITE, ATEX, Class I Div2 and SEMI F47 Requirements
ƒ 3 Year Warranty
GENERAL DESCRIPTION
The DIMENSION CP-Series units are high-end power
supplies in a medium price range without compromising
quality, reliability and performance. The CP-Series is
part of the DIMENSION power supply family. The most
outstanding features of CP10.241 are the high
efficiency, advanced inrush current limitation, active PFC
and the wide operational temperature range.
The CP-Series includes all the essential basic functions.
The devices have a power reserve of 20% included,
which may even be used continuously at temperatures
up to +45°C. Additionally, the CP10 can deliver three
times the nominal output current for at least 12ms
which helps to trip fuses on faulty output branches.
The CP10.241-S1 is equipped with quick-connect spring-
clamp terminals for a fast and reliable electrical
connection. Spring-clamp terminals are the preferred
terminals when applications are exposed to mechanical
vibration.
High immunity to transients and power surges as well as
low electromagnetic emission, a DC-OK relay contact
and a large international approval package for a variety
of applications makes this unit suitable for nearly every
situation.
ORDER NUMBERS
Power Supply
CP10.241 24-28V Standard unit
CP10.242 With Extended DC Input
(DC 110-300V)
CP10.241-S1 24-28V with spring-clamp
terminals
Accessory
ZM12.SIDE Side mount bracket
YR40.242
Redundancy module
SHORT-FORM DATA
Output voltage DC 24V
Adjustment range 24 – 28V
Output current 10A
at 24V, amb <60°C
12A
at 24V, amb <45°C
8.6A
at 28V, amb <60°C
10.3A
at 28V, amb <45°C
Output power
240W / 288W at <60°C / <45°C
Output ripple
< 50mVpp
20Hz to 20MHz
AC Input voltage AC 100-240V -15%/ +10%
Mains frequency 50-60Hz
±6%
AC Input current 2.15 / 1.13A
at 120 / 230Vac
Power factor
0.99 / 0.97
at 120 / 230Vac
AC Inrush current 6 / 9A pk
at 40°C 120/230Vac
DC Input
DC 110-150V ^±20% CP10.241
DC 110-300V ^±20% CP10.242
Efficiency
93.6 / 95.2%
at 120 / 230Vac
Losses
16.4 / 12.1W
at 120 / 230Vac
Temp. range
-25°C to +70°C operational
Derating
6W/°C
+60 to +70°C
Hold-up time
37 / 37ms
at 120 / 230Vac
Dimensions
39x124x117mm WxHxD
Weight
600g / 1.3lb
MARKINGS
IND. CONT. EQ.
UL 508
UL 60950-1
EMC, LVD, ATEX
Class I Div 2
IECEx
ATEX
II 3G Ex nA nC II T4 Gc ^{Marine, planned}
Feb. 2016 / Rev. 1.3 DS-CP10.241-EN
All parameters are specified at 24V, 10A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
1/27