PT6547 Datasheet, PDF (35/35 Pages) Princeton Technology Corp – LCD Driver IC with Key Input Function

LCD Driver IC with Key Input Function
Symbol
A
A1
A2
b
D
D1
e
E
E1
θ
θ1
θ2
θ3
C
L
L1
R1
R2
S
ccc
Min.
-
0.05
1.35
0.17
0º
0º
11º
11º
0.09
0.45
0.08
0.08
0.20
Nom.
-
-
1.40
0.22
16.00 BSC.
14.00 BSC.
0.50 BSC.
16.00 BSC.
14.00 BSC.
3.5º
-
12º
12º
-
0.60
1.00 REF.
-
-
-
0.08
Tel: [phone]
Fax: [phone]
URL: http://www.princeton.com.tw
PT6547
Max.
1.60
0.15
1.45
.027
7º
-
13º
13º
0.20
0.75
-
0.20
-
Notes:
1. Dimensioning and tolerancing per ASMEY14.5-1994.
2. The top package body size may be smaller than the bottom package size by as much as 0.15 mm.
3. Datums A-B and D to be determined at the datum plane H.
4. Dimensions D1 and E1 do not include mold protrusions. Allowable protrusions is 0.25mm
per side. D1 and E1 are maximum plastic body size dimensions including mismatch.
5. Details of Pin1 identifier are optional but must be located within the zone indicated.
6. Dimension b does not include dambar protrusion. Allowable dambar protrusion shall not cause
the lead width to exceed the maximum b dimension by more than 0.08 mm. Dambar cannot be
located on the lower radius or the foot. Minimum space between protrusion and an adjacent lead
is 0.07mm for 0.4mm and 0.5mm pitch packages.
7. Exact shape of each corner is optional.
8. A1 is defined as the distance from the seating plane to the lowest point on the package body.
9. Controlling Dimension: Millimeters
10. Refer to JEDEC MS-026 Variation BED
JEDEC is the registered trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.
PT6547 V1.2
- 35 -
January, 2006