|
PT6959_10 Datasheet, PDF (20/20 Pages) Princeton Technology Corp – LED Driver IC | |||
|
◁ |
Tel: 886-2-66296288
Fax: 886-2-29174598
URL: http://www.princeton.com.tw
LED Driver IC
PT6959
Notes:
1. Dimensioning and tolerancing per ANSI Y14.5-1982.
2. Dimension âDâ does not include mold flash, protrusions or gate burrs. Mold Flash, protrusion or
gate burrs shall not exceed 0.15mm (0.006 in) per side.
3. Dimension âEâ does not include interlead flash or protrusions. Interlead flash or protrusions shall
not exceed 0.25 mm (0.010 in) per side.
4. The chamfer on the body is optional. It is not present, a visual index feature must be located
within the crosshatched area.
5. âLâ is the length of the terminal for soldering to a substrate.
6. âNâ is the number of terminal positions. (N=28)
7. The lead width âBâ as measured 0.36 mm (0.014 in) or greater above the seating plane, shall not
exceed a maximum value of 0.61 mm (0.24 in).
8. Controlling dimension: MILLIMETER.
9. Refer to JEDEC MS-013 Variation AE
JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.
PT6959 V1.5
- 20 -
June, 2005
|