PT6313-S Datasheet, PDF (20/20 Pages) Princeton Technology Corp – VFD Driver/Controller IC

Tel: [phone]
Fax: [phone]
URL: http://www.princeton.com.tw
VFD Driver/Controller IC
PT6313-S
Notes:
1. Dimensioning and tolerancing per ANSI Y14.5-1982.
2. Dimension D does not include mold flash, protrusions or gate burrs. Mold flash, protrusions and gate
burrs shall not exceed 0.15mm (0.006 in) per side.
3. Dimension E does not include interlead flash or protrusions. Interlead flash and protrusion shall not
exceed 0.15mm (0.016in) per side.
4. The chamfer on the body is optional. If it is not present, a visual index feature must be located within
the crosshatched area.
5. L is the length of terminal for soldering to a substrate.
6. N is the number of terminal positions (N=28).
7. The lead width B as measured 0.36mm (0.014in) or greater above the seating plane, shall not
exceed a maximum value of 0.61 mm (0.024 in).
8. Controlling dimension: MILLIMETER
9. Refer to JEDEC MS-013 Variation AE.
JEDEC is the registered trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION
PT6313-S V1.2
- 20 -
September, 2005