|
PT6955_10 Datasheet, PDF (19/19 Pages) Princeton Technology Corp – LED Driver IC | |||
|
◁ |
Tel: 886-2-66296288
Fax: 886-2-29174598
URL: http://www.princeton.com.tw
LED Driver IC
PT6955
Notes:
1. Dimensioning and tolerancing per ANSI Y 14.5-1982.
2. Dimension âDâ does not include mold flash, protrusions or gate burrs. Mold Flash,
protrusion or gate burrs shall not exceed 0.15mm (0.006 in)per side.
3. Dimension âEâ does not include interlead flash protrusions. Interlead flash or protrusions shall not
exceed 0.25 mm (0.010 in) per side.
4. The chamfer on the body is optional. It is not present, a visual index feature must be located within
the crosshatched area.
5. âLâ is the length of the terminal for soldering to a substrate.
6. âNâ is the number of terminal position. (N=24)
7. The lead width âBâ as measured 0.36 mm (0.014 in) or greater above the seating plane, shall not
exceed a maximum value of 0.61mm (0.24 in).
8. Controlling dimension: MILLIMETER.
9. Refer to JEDEC MS-013, Variation AD.
JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.
PT6955 V1.5
- 19 -
June, 2005
|