FAB1107007 Datasheet, PDF (1/1 Pages) Power System Technology – FAB1107007

FAB1107007
Features
90-265Vac Input voltage ranges or 130-350Vdc
Unit will operate at 90-240Vac input volatge at 400Hz but may not meet PF
or THD specs
Outputs : +84V / 300W, +35V/37.5W, -35V / 37,5W, +12V/10W
225 * 127 * 38.6 mm - Input screw connectors
Meet to MIL-STD-461E, CE101, CE102, EN55022A, EN61000-4-2,-4,-5,-11,-16
Conduc�on cooled. opera�ng -20°C to +85°C max on baseplate
Input : screw connector (Phoenix). Output : Molex serie minifit connector
type. Signal : Molex serie KK connector type
Safety IEC/EN 60950-1, RoHS lead-free-solder compliant
RoHS
FAB1107007 is a semi-standard product based on the PST21600 family with modifica�on of output voltages.
Electrical Input Data
Signal
Input
Characteristics
Conditions
90-265Vac
170Vdc Unit
min typ max min typ max
44-63Hz for input Vac. For 440Hz
Operating input voltage operating input voltage is 90- 90 230 265 130 170 350 V
240Vac
Surge
<=100ms
280
395 Vac
Input current
At Vin min
5,8
3,2
A
No-load input power At Vin nom(230Vac and 170Vdc)
33
25
W
Peak inrush current
At Vin nom
1,9 20
A
Hold up time
Input = 90Vac 50Hz at full load 20 33
ms
Start up time Input 115 or 230Vac 50Hz at full load 1,4 1,5 1,8
s
Electrical Output Data
- Led Input and Output
- Inhibi�on :
Standards
Built to meet. No laboratory cer�fica�on (cer�fied in the customer equipment).
Connector Pin Alloca�on
Output
+84V
+35V
-35V
+12V
Unit
Characteristics
Conditions min typ max min typ max min typ max min typ max
Output voltage
83,9 84 84,7 34,9 35,0 35,3 -34,9 -35,0 -35,3 11,6 12 12,4 V
Trim range
-20%
10% -20%
10% -20%
10%
V
Overvoltage protection
94,1 97,6 101,1 40,4 41,9 43,4 -40,4 -41,9 -43,4
V
Nominal output current
3,6
1,1
1,1
0,8
A
Max. output current
4,16
4,16
4,16
1,5 A
Output current limit
4,2 4,8 5,6 4,2 4,8 5,6 4,2 4,8 5,6
>1,5
A
Output noise
200
100
100
420 mv
Dynamic load regulation
Output voltage trim
68,25
90 28,7
39,2 -28,7
-39,2
V
Mechanical Data ^{Hold up time}
Input= 90Vac 50Hz
at full load
20
33
ms
Start up time
Input 115 or 230Vac
50Hz at full load
1,4
1,5
1,8
s

J1 : Input connector (Phoenix GMKDS3/3-7,62)
PIN1
PIN2
PIN3
Earth
Neutral
Phase
J8 : Output 84Vdc (Molex 39281043)
PIN1, 2 Return +84Vdc
PIN3, 4 +84Vdc
J9 : Output +/-35Vdc & +12Vdc (Molex 39281063)
PIN1, 2 Return +/-35V
PIN3 +35V
PIN4 -35V
PIN5 +12V
PIN6 Return +12V
J10 : Output signal & inhibit (Molex 22272061)
  
PIN1
PIN2
PIN3
PIN4
PIN5
PIN6
Return signal & inhibit
Pgood +/-35V
Inhibit +/- 35V
NC
Inhibit +84V
Pgood +84V



In partnership with

www.powersystemtechnology.com
Power System Technology - Z.A. la Paillerie- 61340 BERD’HUIS (France)
Tél. [phone] - Fax [phone] - [e-mail]