PE4272 Datasheet, PDF (3/11 Pages) Peregrine Semiconductor Corp. – SPDT Broadband UltraCMOS™ DC - 3 GHz RF Switch

PE4272
Product Specification
Table 5. Single-pin Control Logic Truth Table
Control Voltages
Signal Path
Pin 1 (VDD) = VDD
Pin 2 (CTRL) = High
RFC to RF1
Pin 1 (VDD) = VDD
Pin 2 (CTRL) = Low
RFC to RF2
Table 6. Complementary-pin Control Logic
Truth Table
Control Voltages
Signal Path
Pin 1 (VDD) = Low
Pin 2 (CTRL) = High
RFC to RF1
Pin 1 (VDD) = High
Pin 2 (CTRL) = Low
RFC to RF2
Control Logic Input
The PE4272 is a versatile RF CMOS switch that
supports two operating control modes; single-pin
control mode and complementary-pin control
mode.
Single-pin control mode enables the switch to
operate with a single control pin (pin 2) supporting
a +3-volt CMOS logic input, and requires a
dedicated +3-volt power supply connection (pin 1).
This mode of operation reduces the number of
control lines required and simplifies the switch
control interface typically derived from a CMOS
µProcessor I/O port.
Complementary-pin control mode allows the
switch to operate using complementary control
pins CTRL and V_DD (pins 2 & 1), that can be
directly driven by +3-volt CMOS logic or a suitable
µProcessor I/O port. This enables the PE4272 to
operate in positive control voltage mode within the
PE4272 operating limits.
Document No. 70-0173-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 3 of 11