PE64909 Datasheet, PDF (1/11 Pages) Peregrine Semiconductor – UltraCMOS Digitally Tunable Capacitor

Product Description
PE64909 is a DuNE™ technology-enhanced Digitally
Tunable Capacitor (DTC) based on Peregrine’s UltraCMOS^®
technology. This highly versatile product supports a wide
variety of tuning circuit topologies with emphasis on
impedance matching and aperture tuning applications.
PE64909 offers high RF power handling and ruggedness
while meeting challenging harmonic and linearity
requirements enabled by Peregrine’s HaRP™ technology.
The device is controlled through the widely supported 3-wire
(SPI compatible) interface. All decoding and biasing is
integrated on-chip and no external bypassing or filtering
components are required.
DuNE™ devices feature ease of use while delivering
superior RF performance in the form of tuning accuracy,
monotonicity, tuning ratio, power handling, size, and quality
factor. With built-in bias voltage generation and ESD
protection, DTC products provide a monolithically integrated
tuning solution for demanding RF applications.
Product Specification
PE64909
UltraCMOS^® Digitally Tunable Capacitor
(DTC)
100-3000 MHz
Features
 3-wire (SPI compatible) serial interface
with built-in bias voltage generation and
ESD protection
 DuNE™ technology enhanced
 4-bit 16-state Digitally Tunable Capacitor
 Shunt configuration C = 0.6 pF to 2.35 pF
(3.9:1 tuning ratio) in discrete 117 fF
steps
 High RF power handling (30 V_pk RF) and
linearity
 Wide power supply range (2.3 to 4.8V)
and low current consumption
(typ. 140 μA at 2.75V)
 High ESD tolerance of 2kV HBM
on all pins
Applications include:
 Tunable antennas
 Tunable matching networks
 Tunable filter networks
 Phase shifters
Figure 1. Functional Diagram
Figure 2. Package Type
10-lead 2 x 2 x 0.55 mm QFN
Document No. DOC-30414-2 │ www.psemi.com
71-0090-01
©2013 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 11