PE42524 Datasheet, PDF (1/16 Pages) Peregrine Semiconductor – UltraCMOS SPDT RF Switch, 10 MHz-40 GHz

PE42524
Document Category: Product Specification
UltraCMOS® SPDT RF Switch, 10 MHz–40 GHz
Features
• Wideband support up to 40 GHz
• High port to port isolation
▪ 48 dB @ 26.5 GHz
▪ 39 dB @ 35 GHz
▪ 33 dB @ 40 GHz
• Excellent linearity performance
▪ P1dB of 31.5 dBm @ 26.5 GHz
▪ P1dB of 28.0 dBm @ 35 GHz
▪ IIP3 of 50 dBm @ 13.5 GHz
• Fast RF T_rise/T_fall time of 55 ns
• Low insertion loss
▪ 1.8 dB @ 26.5 GHz
▪ 3.1 dB @ 35 GHz
• Flip-chip die
Applications
• Test and measurement
• Microwave backhaul
• Radar
• Military communications
Figure 1 • PE42524 Functional Diagram
RFC
RF1
RF2
ESD
V1 V2
Product Description
The PE42524 is a HaRP™ technology-enhanced reflective SPDT RF switch die that supports a wide frequency
range from 10 MHz to 40 GHz. This wideband flip-chip switch delivers high isolation performance, excellent
linearity and low insertion loss, making this device ideal for test and measurement (T&M), microwave backhaul,
radar and military communications (mil-comm) applications. At 30 GHz, the PE42524 exhibits 17 dB active port
return loss, 47 dB isolation and 2.2 dB insertion loss. No blocking capacitors are required if DC voltage is not
present on the RF ports.
The PE42524 is manufactured on Peregrine’s UltraCMOS^® process, a patented variation of silicon-on-insulator
(SOI) technology on a sapphire substrate.
©2014-2015, Peregrine Semiconductor Corporation. All rights reserved. • Headquarters: 9380 Carroll Park Drive, San Diego, CA, 92121
Product Specification
www.psemi.com
DOC-48614-4 – (12/2015)