PE42359 Datasheet, PDF (1/14 Pages) Peregrine Semiconductor – SPDT UltraCMOS® RF Switch 10 MHz – 3 GHz

Product Description
The PE42359 UltraCMOS^® RF switch is designed to
cover a broad range of applications from 10 MHz through
3 GHz. This reflective switch integrates on-board CMOS
control logic with a low voltage CMOS-compatible control
interface, and can be controlled using either single-pin or
complementary control inputs. Using a nominal +3-volt
power supply voltage, a typical input 1 dB compression
point of +33.5 dBm can be achieved. PE42359 also
meets the quality and performance standards for
automotive applications and has received AEC-Q100
Grade 2 certification.
The PE42359 is manufactured on Peregrine’s
UltraCMOS^® process, a patented variation of silicon-on-
insulator (SOI) technology on a sapphire substrate,
offering the performance of GaAs with the economy and
integration of conventional CMOS.
Product Specification
PE42359
SPDT UltraCMOS^® RF Switch
10 MHz – 3 GHz
Features
 AEC-Q100 Grade 2 certified
 Supports operating temperature up to
+105°C
 Single-pin or complementary CMOS
logic control inputs
 Low insertion loss
 0.35 dB @ 1000 MHz
 0.50 dB @ 2000 MHz
 Isolation of 30 dB @ 1000 MHz
 High ESD tolerance of 2kV HBM
 Typical input 1 dB compression point of
+33.5 dBm
 1.8V minimum power supply voltage
 Small SC-70 package
Figure 1. Functional Diagram
RFC
RF1
ESD
RF2
ESD
CMOS
Control
Driver
CTRL CTRL or V_DD
DOC-02109
Figure 2. Package Type
6‐lead SC‐70
Document No. DOC-13241-3 │ www.psemi.com
©2012-2013 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 14