|
SMDA03LC_12 Datasheet, PDF (7/10 Pages) Protek Devices – 500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY | |||
|
◁ |
Only One Name Means ProTekâTionâ¢
application information
TPIN
TPIP
SMDA03LC - SMDA24LCC
8
7
6
5
TPON
1
2
3
4
TPOP
figure 2 - BIDIRECTIONAL COMMON-MODE ETHERNET PROTECTION
Circuit connectivity is as follow:
⢠TPIN connected to Pin 5.
⢠TPIP connected to Pin 6.
⢠TPON connected to Pin 1.
⢠TPOP connected to Pin 2.
⢠Pins 3, 4, 7 and 8 connected to ground.
circuit board recommendations
Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended:
⢠The protection device should be placed near the input terminals or connectors, the device will divert the transient current
immediately before it can be coupled into the nearby traces.
⢠The path length between the TVS device and the protected line should be minimized.
⢠All conductive loops including power and ground loops should be minimized.
⢠The transient current return path to ground should be kept as short as possible to reduce parasitic inductance.
⢠Ground planes should be used whenever possible. For multilayer PCBs, use ground vias.
05074.R10 10/12
Page 7
www.protekdevices.com
|
▷ |