PRSB68C Datasheet, PDF (5/5 Pages) Protek Devices – STANDARD TVS COMPONENTS

PRSB6.8C
PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
A
H
C
D
TOP
B
BOTTOM
E
SIDE
F
MOUNTING PAD
A
B
C
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
E
F
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
PACKAGE DIMENSIONS
DIM MIN
A 0.023
B 0.038
C 0.018
D 0.010
E 0.012
F 0.010
H 0.011
NOTES
INCHES
NOR
0.024
0.040
0.020
0.012
0.014
0.012
0.012
MAX
0.025
0.042
0.022
0.014
0.016
0.014
0.013
MILLIMETERS
MIN NOR MAX
0.58 0.61 0.64
0.97 1.02 1.07
0.46 0.51 0.56
0.25 0.30 0.36
0.30 0.36 0.41
0.25 0.30 0.36
0.28 0.30 0.33
1. Controlling dimensions in inches.
2. Decimal tolerances for mounting pad : ± 0.003” (±0.08mm).
3. Maximum size: 0.052” (1.321mm) by 0.036” (0.914mm).
PAD DIMENSIONS
DIM
MILLIMETERS
INCHES
A
0.762 ± 0.025
0.030 ± 0.001
B
0.356 ± 0.025
0.014 ± 0.001
C
0.381 ± 0.025
0.015 ± 0.001
E
1.473 ± 0.050
0.058 ± 0.002
F
0.559 ± 0.025
0.022 ± 0.001
TAPE & REEL ORIENTATION
TAPE & REEL ORDERING NOMENCLATURE
Solder Print Diameter
0.010” - 0.012”
1. Surface mount product is taped and reeled in accordance with EIA 481.
2. 8mm Plastic Tape: 7 Inch Reels - 5,000 pieces per reel. Ordering Suffix: -T75-1 (i.e., PRSB6.8C-T75-1).
3. Suffix - LF = Lead Free Pure-Tin Plating: i.e., PRSB6.8C-LF-T75-1.
NOTE
1. Top view of tape. Solder PADS face down in tape package.
Outline & Dimensions: Rev 0 - 4/05, 06059
Tape & Reel Specifications (Dimensions in millimeters)
Reel Dia.
Tape Width A0
B0
K0
D
E
F
W
P0
P2
P
tmax
178mm (7”)/330mm(13”) 8mm 0.80± 0.10 1.20± 0.10 0.70 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 2.00 ±0.10 0.25
P0
10 Pitches Cumulative
D
P2
Tolerance on Tape. ± 0.2
t
Top cover tape
K0
A0
B0
E
F
W
P
User Direction of Feed
COPYRIGHT © ProTek Devices 2005
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical
characteristics described herein without notice (except JEDEC).
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that
the final judgement concerning selection and specifications is the buyer’s and that in furnishing
engineering and technical assistance, ProTek assumes no responsibility with respect to the
selection or specifications of such products.
05224.R3 9/05
5
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
Web Site: www.protekdevices.com
www.protekdevices.com