TMDA05-18 Datasheet, PDF (4/4 Pages) Protek Devices – STANDARD CAPACITANCE TVS ARRAY

TMDA05-18
PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
A
TSSOP-20
20
11
1
J
B
C
10
D
G
E
F
M
MOUNTING PAD
0.025” TYP
N
0.016” ± 0.003”
KP
PACKAGE DIMENSIONS
MILLIMETERS
INCHES
DIM
MIN
MAX
MIN
MAX
A
0.65 BSC 0.65 BSC 0.026 BSC 0.026 BSC
B
4.30
4.50
0.169 0.177
C
6.30
6.50
0.248 0.256
D
-
6.60
-
0.260
E
-
1.20
-
0.047
F
0.05
0.25
0.002 0.010
G
0.16
0.32
0.006 0.013
J
-
0.95
-
0.037
K
0°
10°
0°
10°
M
0.09
0.24
0.004 0.009
N
0.45
0.55
0.018 0.022
P
0.09
0.20
0.004 0.008
NOTES
1. Dimensions “A” and “B” are Datum.
2. Dimensions “B” and “D” do not include mold protrusions.
3. Maximum mold protrusion is 0.005” (0.13 mm) per side.
4. Dimensioning and tolerances per ANSI Y14.5M, 1982.
5. Dimensions are exclusive of mold flash and metal burrs.
0.214” ± 0.004”
0.033” ± 0.003”
0.280” MIN
TAPE & REEL/BULK ORDERING NOMENCLATURE
1. Surface mount product is taped and reeled in accordance
with EIA-481.
2. Suffix-T13 = 13 Inch Reel - 1,000 pieces per 24mm tape,
i.e., TMDA05-18-T13.
3. Suffix - LF = Lead-Free, Pure-Tin Plating,
i.e., TMDA05-18-LF-T13.
4. No Suffix = Product Shipped in Tubes of 37 pcs per Tube.
Outline & Dimensions: Rev 1 - 11/01, 06014
COPYRIGHT © ProTek Devices 2005
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical
characteristics described herein without notice (except JEDEC).
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that
the final judgement concerning selection and specifications is the buyer’s and that in furnishing
engineering and technical assistance, ProTek assumes no responsibility with respect to the
selection or specifications of such products.
05114.R3 3/05
4
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
Web Site: www.protekdevices.com
www.protekdevices.com