PSMDA05-18_07 Datasheet, PDF (4/4 Pages) Protek Devices – STANDARD CAPACITANCE TVS ARRAY

SO-20WB PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
-A-
PSMDA05-18
SO-20WB
20
11
-B- _P
0.010” (0.25 MM) M B M
10 PL
1
10
G
C
20 PL
K
D
0º - 7º
-T-
0.010” (0.25 MM) M T B S A S
MOUNTING PAD
0.050” TYP
R X 45º
F
0.030” ± 0.005”
0.325” ± 0.005”
0.420” MIN
0.045” ± 0.005”
DIM
A
B
C
D
F
G
J
J
K
P
R
NOTES
PACKAGE DIMENSIONS
MILLIMETERS
MIN
MAX
INCHES
MIN
MAX
12.65
7.40
2.35
0.35
0.50
1.27 BSC
0.25
0.10
10.05
0.25
12.95
7.60
2.65
0.49
0.90
1.27 BSC
0.32
0.25
10.55
0.75
0.499
0.292
0.093
0.014
0.020
0.05 BSC
0.010
0.004
0.395
0.010
0.510
0.299
0.104
0.019
0.035
0.05 BSC
0.012
0.009
0.415
0.029
1. - T - = Seating Plane and Datum Surface.
2. Dimensions “A” and “B” are Datum.
3. Dimensions “A” and “B” do not include mold protrusion.
4. Maximum mold protrusion is 0.015” (0.380 mm) per side.
5. Dimensioning and tolerances per ANSI Y14.5M, 1982.
6. Dimensions are exclusive of mold flash and metal burrs.
TAPE & REEL/BULK ORDERING NOMENCLATURE
1. Surface mount product is taped and reeled in accordance
with EIA-481.
2. Suffix-T13 = 13 Inch Reel - 1,000 pieces per 24mm tape,
i.e., PSMDA05-18-T13.
3. Suffix - LF = Lead-Free, Pure-Tin Plating,
i.e., PSMDA05-18-LF-T13.
4. No Suffix = Product Shipped in Tubes of 37 pcs per Tube.
Outline & Dimensions: Rev 1 - 11/01, 06018
COPYRIGHT © ProTek Devices 2007
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC).
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is
the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such
products.
05082.R4 3/07
4
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
Web Site: www.protekdevices.com
www.protekdevices.com