LP05C_07 Datasheet, PDF (3/3 Pages) Protek Devices – STANDARD CAPACITANCE TVS ARRAY

SOT-23 PACKAGE OUTLINE & DIMENSIONS
PACKAGE OUTLINE
LP05C
SOT-23
A
L
3
BS
1
2
K
V
G
C
D
H
MOUNTING PAD
0.037” (0.95mm)
0.033” (0.85mm)
0.079” (2.00mm)
0.033” (0.85mm)
0º - 10º
J
PACKAGE DIMENSIONS
MILLIMETERS
INCHES
DIM
MIN
MAX
MIN
MAX
A
2.80
3.04
0.1102 0.1197
B
1.20
1.40
0.0472 0.0551
C
0.89
1.11
0.0350 0.0440
D
0.37
0.50
0.0150 0.0200
G
1.78
2.04
0.0701 0.0807
H
0.013
0.100 0.0005 0.0040
J
0.085
0.177 0.0034 0.0070
K
0.45
0.60
0.0180 0.0236
L
0.89
1.02
0.0350 0.0401
S
2.10
2.50
0.0830 0.0984
V
0.45
0.60
0.0177 0.0236
NOTES
1. Dimensioning and tolerances per ANSI Y14.5M, 1985.
2. Controlling Dimension: Inches
3. Pin 3 is the cathode (Unidirectional Only).
4. Dimensions are exclusive of mold flash and metal burrs.
TAPE & REEL ORDERING NOMENCLATURE
1. Surface mount product is taped and reeled in accordance
with EIA-481.
2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape,
i.e., LP05C-T7.
3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape,
i.e., LP05C-T13.
4. Suffix - LF = Lead-Free, Pure-Tin Plating,
i.e., LP05C-LF-T7.
Outline & Dimensions: Rev 1 - 11/01, 06012
COPYRIGHT © ProTek Devices 2007
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC).
DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is
the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such
products.
05122.R2 2/07
3
ProTek Devices
2929 South Fair Lane, Tempe, AZ 85282
Tel: [phone] Fax: [phone]
E-Mail: [e-mail]
Web Site: www.protekdevices.com
www.protekdevices.com