|
PLW2.8_11 Datasheet, PDF (1/6 Pages) Protek Devices – LOW CAPACITANCE TVS COMPONENT | |||
|
Only One Name Means ProTekâTionâ¢
LOW CAPACITANCE TVS COMPONENT
PLW2.8
Description
The PLW2.8 is a low capacitance, transient voltage suppressor array designed to protect applications such as wire-
less telecommunication devices, PCMCIA cards and portable electronics. This device is available in a unidirectional
configuration with a working voltage of 2.8V and a minimum breakdown voltage of 3.0V. The PLW2.8 is rated at 50W
peak pulse power (8/20µs), which is sufficient protection for tertiary type lightning threats at key interface locations.
The PLW2.8 is ideally suited to protect data I/O ports against ESD. This device meets the requirements of IEC 61000-2.
Packaged in a SC-79 configuration, this device can be substituted for similar 0803 outlines.
SC-79 package
Features
⢠Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
⢠50 Watts Peak Pulse Power per Line (tp = 8/20µs)
⢠Unidirectional Configuration
⢠Replacement for MLV (0803)
⢠Low Leakage Current <1.0µA
⢠Low Capacitance: 6pF (Typical)
⢠RoHS Compliant
⢠REACH Compliant
Mechanical characteristics
⢠Molded JEDEC SC-79 Package
⢠Approximate Weight: 2 milligrams
⢠Lead-Free Pure-Tin Plating (Annealed)
⢠Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
⢠8mm Tape and Reel Per EIA Standard 481
⢠Flammability Rating UL 94V-0
applications
⢠Ethernet - 10/100/1000 Base T
⢠SMART Phones
⢠Portable Electronics
PIN CONFIGURATION
1
05184.R6 9/10
2
Page 1
www.protekdevices.com
|
▷ |