PSP1045 Datasheet, PDF (5/6 Pages) PREMO CORPORATION S.L – SMD Power Inductors Shielded

PSP1045 & PSP1055
SMD Power Inductors Shielded
C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone [phone] Fax [phone]
E-mail: [e-mail] Web http://www.grupopremo.com
Style
Dimensions [mm]
A
B
C
D
G
N
T
13 – 24
330
21±0.8
13±0.5
24
26⁺⁰
50^-0
30.4
Series
PSP1045
PSP1055
Q’TY(pcs)
600
600
Inner : Reel
G.W.(gw)
700
700
Style
13 – 24
13 – 24
Q’TY(pcs)
2,400
2,400
Outer : Carton
G.W.(Kg)
Size(cm)
6.50
40 x 40 x 24
6.50
40 x 40 x 24
8. Labelling
9. Reliability Test
Test item
Specification
Test condition
Solderability
More than 90% of the
terminal electrode
shall be covered
with fresh solder
Preheat : 150±25% for 60 seconds
Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent
Solder temp. : 250±5ºC
Flux : Rosin
Dip time : 4±1 seconds
Thermal shock test
(Temp. cycle)
Inductance shall
not change more
than ±20%
Room temp.
15 minutes
Room temp.
15 minutes
Total : 50 cycles
-25±2ºC
30 minutes
85±2ºC
30 minutes
Humidity
Resistance test
Temperature : 40±2ºC
Humidity : 90 ~ 95%
Applied current : Per specifications
Time : 500 hours
High temp.
Resistance test
Temperature : 105±2ºC
Applied current : Per specifications
Time : 500 hours
5
SMD Power Inductors
PPRREEMMOO
All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation.