PSH3018 Datasheet, PDF (10/11 Pages) PREMO CORPORATION S.L – SMD Power Inductors Shielded

PSH3018 , PSH3027 , PSH4028 ,
PSH5018 , PSH5028 & PSH6022
SMD Power Inductors Shielded
C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas .Málaga (Spain) Phone [phone] Fax [phone]
E-mail: [e-mail] Web http://www.grupopremo.com
9. Reliability Test
Test item
Solderability
Thermal shock test
(Temp. cycle)
Humidity
Resistance test
High temp.
Resistance test
Specification
Test condition
More than 90% of the
terminal electrode
shall be covered
with fresh solder
Preheat : 150±25% for 60 seconds
Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent
Solder temp. : 235±5ºC
Flux : Rosin
Dip time : 4±1 seconds
Inductance shall
not change more
than ±20%
Room temp.
15 minutes
Room temp.
15 minutes
Total : 50 cycles
Temperature : 40±2ºC
Humidity : 90 ~ 95%
Applied current : Per specifications
Time : 500 hours
Temperature : 105±2ºC
Applied current : Per specifications
Time : 500 hours
-25±2ºC
30 minutes
85±2ºC
30 minutes
10. Edition Control
Edition Date
Change description
Made by
SMD Power Inductors
10
PPRREEMMOO
All rights reserved. Passing on of this document, use and communication of contents not permitted without written authorisation.