TR1102CAP Datasheet, PDF (1/1 Pages) PREMO CORPORATION S.L – SMD CAP Ferrite Transponder Inductor

TR1102CAP
SMD CAP Ferrite Transponder Inductor
11.8 x 3.1 x 2.6 mm
Features
The TR1102CAP series of surface
mountable ferrite wound inductor is an
evolution of the TR1102 series, and also
one of the very rst SMD coils designed
for transponder use. Its length and cross
sectional area are optimized to achieve the
maximum sensitivity in the coil axis. And
the use of high quality plastic material for
the cap provides an additional mechanical
protection to the coil with the thinnest
walls, combined with a high performance
in temperature.
The TR1102CAP is a solution that
combines the low cost and high-speed
assembly of the circuit component, with
the high mechanical protection provided
by the cap, and it’s excellent when the
application demands a stronger coil.
Dimensions
Characteristics
- Size: 11.8 x 3.1 x 2.6 mm.
- Terminals: Ag-Ni-Sn100.
- Wire: H, 180ºC, Solderable.
- Max. Operating Temperature 130ºC.
All dimensions in mm
Tolerance unless otherwise speci ed +- 0.20mm
Electrical speci cations (7.2mH)
Code
L @125 kHz
(mH)
Q min. SRF min.
@125 kHz (kHz)
DCR min. Sensitivity min.@125 kHz
(Ohm)
(mVpp/App/m)
TR1102CAP-0720J 7.20 ±5%
25
330
90
70
Inductance, Q factor, DCR and SRF measured with an LCR meter Wayne Kerr PMA 3260A.
The speci cation chart is a reference guide for the most common required values at working frequencies of 125 kHz. Any
other inductance value at LF or tighter tolerances can be provided. Please contact our sales deparment for any inquiry.
27