TP0702CAP Datasheet, PDF (1/1 Pages) PREMO CORPORATION S.L – SMD CAP Hard Ferrite Transponder Inductor

TP0702CAP
8.5x2.9x2.6 mm
SMD CAP Hard Ferrite Transponder Inductor (2.38 mH – 10.8 mH)
Features
This TP0702 with CAP is a very strong
solution in very small dimensions. The
component has very good electrical
properties and it is a very good solution
for RTPMS, Keyless Go and Keyless Entry
Systems. On the other hand, the plastic
box, where it is inserted the piece, offers
a special protection to the wound and
facilitates the pick and place.
Characteristics
- Size: 8.5 x 2.9 x 2.6 mm.
- Very good mechanical performance.
- High sensitivity in the smallest volume
- Very stable electrical properties in full
operational temperature range
(-40 ºC --> +125 ºC).
- Good performance in thermal shock.
- Good cost/performance ratio.
- This component is functional also to
20kHz and 134kHz.
Dimensions
Recommended pad layout
Electrical speci cations
P/N
L (mH)
@125 kHz
Tolerance Cres (pF)
Q @125 kHz
SRF
(kHz)
TP0702CAP-0238J
2.38
TP0702CAP-0491J
4.91
TP0702CAP-0720J
7.20
TP0702CAP-0900J
9.00
±5%
680
±5%
330
±5%
225
±5%
180
>30
>750
>35
>550
>20
>450
>25
>400
Sensitivity
(mVpp/App/m)
@125 kHz
>25
>35
>49
>53
This chart is a reference guide for the most common required values at working frequency of 125 kHz. Any other inductance value
at LF or tighter tolerances can be provided. Please contact our sales department for any inquiry.
Sensitivity measured with Helmholtz coils H=8.36 App/m @ 125 kHz. Contact us for measurement speci cation.
SRF: Self Resonant Frequency of the coil.
Cres: Capacitor for tuning circuits (125 kHz).
25