TP0602_14 Datasheet, PDF (1/1 Pages) PREMO CORPORATION S.L – Micro SMD Hard Ferrite Transponder Inductor

TP0602
6.6x2.3x1.75 mm (2.38 mH - 10.8 mH)
Micro SMD Hard Ferrite Transponder Inductor
Features
Dimensions
The TP0602 Series of Surface Mountable ferrite
wound inductor is a small transponder solution for
automotive applications like TPMS,Keyless Go and
Keyless entry systems.
- Size:6.6mm x 2.3mm x 1.75mm.
- Good mechanical performance.
- High sensitivity for 20KHz,40KHz and 125KHz
applications.
- Good perfomance in thermal shock test.
- Good cost/perfomance ratio.
- Available high inductance version for hearing aids
applications.
- Good solution for TPMS moulded solutions.
The TP0602 is the smaller SMD transponder coil
available in the market.
- This component is also functional to 20kHz and
134kHz.
All dimensions in mm Layout
Electrical speci cations
125KHz
P/N
L (mH)
Tolerance
Q
TP0602-0238J
TP0602-0491J
TP0602-0720J
TP0602-0900J
2.38
±5%
>35
4.91
±5%
>25
7.20
±5%
>20
9.00
±5%
>20
20KHz
P/N
TP0602-124J
TP0602-104J
TP0602-823J
TP0602-673J
TP0602-563J
TP0602-473J
TP0602-333J
L (mH)
120
100
82
67
56
47
33
Tol. Q (typ)
±5% 4.5
±5% 5.0
±5% 5.6
±5% 6.5
±5% 7.5
±5% 8.0
±5% 10
SRF
>100
>120
>140
>160
>190
>200
>200
SRF (kHz)
>1000
>600
>450
>300
Sensitivity
(mVpp/App/m)
>18
>30
>35
>38
Operating and test freq: 125KHz.
SRF: Self-resonant frequency of the coil.
C: Capacitor for tuning circuits (125khz).
This chart is a reference guide for the most common required values at
working frequency of 125 kHz. Any other inductance value at LF or tighter
tolerances can be provided. Please contact our sales department for any
inquiry.
Sensitivity measured with Helmholtz coils H=8.36 App/m @125 kHz.
Contact us for measurement speci cation.
t
5FSNJOBMT
"H/J4O
t
8JSF
)
$
4PMEFSBCMF
t
.BY
0QFSBUJOH
5FNQFSBUVSF
$
t
3FGFS
UP
UIF
(FOFSBM
'FBUVSFT
PG
4.%

transponder inductors page.
21