TP0602-TC Datasheet, PDF (1/1 Pages) PREMO CORPORATION S.L – Micro SMD Hard Ferrite Telecoil

TP0602-TC
Micro SMD Hard Ferrite Telecoil 6.6 x 2.3 x 1.75 mm (40mH - 170mH)
Features
The TP0602-TC surface mountable ferrite wound
inductor is a small telecoil solution for hearing aid
devices. It uses high quality ferrite core and tiny size
(6.6 x 2.3 x1.75 mm). Those pieces are winding with
thin copper wire up to 12 μm and its inductance
range is 40-170mH. Besides, it has good frequency
and temperature behavior and can be served
with “custom” electrics characteristics according
requirements of hearing aid devices manufacturers.
Main Characteristics
- Small size
- High sensitivity
- SMD mounting
Typical application
- Hearing aid devices
Dimensions and recommended pad layout


Electrical speci cations
P/N
TP0602-TC-04000J
TP0602-TC-10000J
TP0602-TC-17000J
L(mH) @ 1kHz
40
100
170
Tolerance
±5%
±5%
±5%
Rdc (KΩ)
1,1
3,1
4,0
SRF (kHz)
Sensitivity
(mVpp/App/m) @1kHz
> 220
0,80
> 100
0,90
> 80
1,10
This chart is a reference guide for the most common required values at working frequency of 1 kHz.
Please contact our sales department for any inquiry. Contact us for measurement speci cation.
Operating and test frequency: 1kHz
SRF: Self-resonance frequency of the coil
72