SEA_14 Datasheet, PDF (1/1 Pages) PREMO CORPORATION S.L – SMD Small Emitter Antenna

SEA
SMD Small Emitter Antenna
50.80x10.60x6.80mm (33 uH - 470 uH)
Characteristics
This part can be used as emitter antenna of a RF application in low frequency range and
can be mounted like any other SMD component, directly to the PCB. Some use example:
telemetric, telecontrol, atomic watch, PKE, etc.
Size of this component compared to other existing emitter antennas is very small.
- Small size (50.8 x 10.6 x 6.8).
- High stability in temperature (-40ºC up to +85ºC).
- Wide working range (20kHz - 150KHz).
- SMD mounting.
- Custom inductance value under demand.
Mechanical dimensions
Dimensions in mm
Electrical speci cations
Nomenclature description
P/N
L
(mH)
Tolerance
Cres
(nF)
SRF Freq.
(MHz) (kHz)
SEA-A-0192J 0.192 5%
SEA-B-0345J 0.345 5%
SEA-B-0500J 0.500 5%
SEA-B-0734J 0.734 5%
SEA-C-0300J 0.300 5%
330
>3 20@
4.7
>3 125@
3.3
>3 125@
2.2
>3 125@
4.7
>3 134,2@
Electrical diagram and recommended pad layout
Add under the chart: This chart is a reference guide for the most common required values
at working frequency of 20 kHz, 125 kHz or 134.2 kHz. Any other inductance value at LF or
tighter tolerances can be provided. Please contact our sales department for any inquiry.
Sensitivity measured with Helmholtz coils H=8.36 App/m @125 kHz. Contact us for
measurement speci cation
53