RCA-SMD_14 Datasheet, PDF (1/4 Pages) PREMO CORPORATION S.L – Radio Clock Receiver Antenna SMD

RCA-SMD
Radio Clock Receiver Antenna SMD
C/Severo Ochoa 33 – Parque Tecnológico de Andalucía. 29590 Campanillas. Málaga (Spain) Phone [phone] Fax [phone]
E-mail: [e-mail] Web http://www.grupopremo.com
1. Dimensions and Pad Layout
All Dimensions in mm
General Tolerances ±0.1mm
PCB area (surface and internal layers) for welding the antenna must be free of
Ground or Power Supply plane in order to achieve a right behaviour of the antenna.
2. Schematic Diagram
L: Ferrite core coil inductance
C: Tunning internal capacitor C0G
Z: External impedance
3. Materials
Core: Ferrite Core
Wire: Enamelled and Selfbonding copper wire
Capacitor: C0G ceramic capacitor
External housing: material DAP
Resin: material epoxy (part filled with resin potting)
Remark : Products comply with RoHS requirements
1
Radio Clock Antennas
All rights reserved. Share, use or communication of the contents of this document not permitted without written authorisation.