110-91-306-41-605 Datasheet, PDF (1/1 Pages) Precid-Dip Durtal SA – Dual-in-line sockets automatic insertion Open frame Solder tail

56
Platings Sleeve
91
5 µm Sn Pb
93
5 µm Sn Pb
97
5 µm Sn Pb
99
5 µm Sn Pb
Clip
Pin
0.25 µm Au
0.75 µm Au
Goldflash
5 µm Sn Pb
Series 110…41-605
Dual-in-line sockets automatic insertion
Open frame
Solder tail
Thanks to the new design
of the insulator body, this
socket line is fully com-
patible with all standard
automatic insertion
equipment
– Chamfered contact
entries for easy IC inser-
tion without bent leads.
– Soft copper alloy ma-
chined contact allows
clinching
Insertion characteristics:
4-finger standard
Ordering information
For standard versions see table (order codes)
Option:
For multilayer boards up to 3.4 mm, solder tail 4.2 mm, we offer
series 111-xx-xxx-41-613
No.
of
poles
Order Codes
Plating 91
Plating 93
Plating 97
Plating 99
6 110-91-306-41-605 110-93-306-41-605 110-97-306-41-605 110-99-306-41-605
8 110-91-308-41-605 110-93-308-41-605 110-97-308-41-605 110-99-308-41-605
14 110-91-314-41-605 110-93-314-41-605 110-97-314-41-605 110-99-314-41-605
16 110-91-316-41-605 110-93-316-41-605 110-97-316-41-605 110-99-316-41-605
18 110-91-318-41-605 110-93-318-41-605 110-97-318-41-605 110-99-318-41-605
20 110-91-320-41-605 110-93-320-41-605 110-97-320-41-605 110-99-320-41-605
24 110-91-324-41-605 110-93-324-41-605 110-97-324-41-605 110-99-324-41-605
22 110-91-422-41-605 110-93-422-41-605 110-97-422-41-605 110-99-422-41-605
24 110-91-624-41-605 110-93-624-41-605 110-97-624-41-605 110-99-624-41-605
28 110-91-628-41-605 110-93-628-41-605 110-97-628-41-605 110-99-628-41-605
32 110-91-632-41-605 110-93-632-41-605 110-97-632-41-605 110-99-632-41-605
40 110-91-640-41-605 110-93-640-41-605 110-97-640-41-605 110-99-640-41-605
Insulator
dimen-
sions
See
page 52
A
B
C
Fig. 100
Fig. 101
Fig. 102
Fig. 103
Fig. 104
Fig. 105
Fig. 106
Fig. 107
7.6 7.62 10.1
10.1 7.62 10.1
17.7 7.62 10.1
20.3 7.62 10.1
22.8 7.62 10.1
25.3 7.62 10.1
30.4 7.62 10.1
27.8 10.16 12.6
Fig. 17
Fig. 18
Fig. 19
Fig. 108
30.4 15.24 17.7
35.5 15.24 17.7
40.6 15.24 17.7
50.6 15.24 17.7