110-87-306-41-001101 Datasheet, PDF (1/2 Pages) Precid-Dip Durtal SA – DUAL-IN-LINE SOCKETS

WWW.PRECIDIP.COM TEL [phone] [e-mail]
Open frame standard low profile DIL Sockets.
TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 127)
IN S U L AT O R
Black glass filled polyester PCT-GF30-FR
FLAMMABILITY
UL 94V-O
SLEEVE
Brass CuZn36Pb3 (C36000)
CONTACT CLIP (4 FINGER) Beryllium copper (C17200)
ACCEPTED PIN Ø
0.40 to 0.56 mm
FORCES
2 N typ. insertion
1 N typ. withdrawal
(polished steel gauge Ø 0.43 mm)
MECHANICAL LIFE
Min. 100 cycles
RATED CURRENT
1A
CONTACT RESISTANCE
Max. 10 m:
DIELECTRIC STRENGTH Min. 1’000 VRMS
DUAL-IN-LINE SOCKETS
OPEN FRAME / SOLDER TAIL
ORDERING INFORMATION ROHS COMPLIANT PARTS
PP PLATING CODE
87
83
SLEEVE
Tin
Tin
CLIP
Flash gold
0.75 μm gold
Other plating on request (see page 178 for plating specs).
NO. OF POLES A
B
C
10
12.6 5.08 7.6
SEE PAGE 128
Fig. 1
ORDER CODES
110-PP-210-41-001101
4
5.0 7.62 10.1 Fig. 2
110-PP-304-41-001101
6
7.6 7.62 10.1 Fig. 3
110-PP-306-41-001101
8
10.1 7.62 10.1 Fig. 4
110-PP-308-41-001101
10
12.6 7.62 10.1 Fig. 5
110-PP-310-41-001101
12
15.2 7.62 10.1 Fig. 6
110-PP-312-41-001101
14
17.7 7.62 10.1 Fig. 7
110-PP-314-41-001101
16
20.3 7.62 10.1 Fig. 8
110-PP-316-41-001101
18*
22.8 7.62 10.1 Fig. 9
110-PP-318-41-001101
20*
25.3 7.62 10.1 Fig. 10
110-PP-320-41-001101
22*
27.8 7.62 10.1 Fig. 11
110-PP-322-41-001101
24*
30.4 7.62 10.1 Fig. 12
110-PP-324-41-001101
28
35.5 7.62 10.1 Fig. 13
110-PP-328-41-001101
OPTIONS
20
25.4 10.16 12.6 Fig. 14
110-PP-420-41-001101
22
27.8 10.16 12.6 Fig. 15
110-PP-422-41-001101
24
1 Insulators without center bar *
28
Open frame insulators 318, 320, 322, 324, 624, 628, 632, 640
32
and 648 available on special request without center bars; add
30.4 10.16
35.5 10.16
40.6 10.16
12.6
12.6
12.6
Fig. 16
Fig. 17
Fig. 18
110-PP-424-41-001101
110-PP-428-41-001101
110-PP-432-41-001101
suffix 151 to the part number. Example 110-83-628-41-001101
10
12.7 15.24 17.7 Fig. 19
110-PP-610-41-001101
becomes 110-83-628-41-001151
24*
30.5 15.24 17.7 Fig. 20
110-PP-624-41-001101
2 Sockets with increased solder tail length of 4.2 mm
allowing application on multilayer PCBs up to 3.4 mm
thickness replace 110-..-...-..-...... by 111-..-...-..-......
28*
35.5 15.24 17.7 Fig. 21
110-PP-628-41-001101
32*
40.6 15.24 17.7 Fig. 22
110-PP-632-41-001101
36
45.7 15.24 17.7 Fig. 23
110-PP-636-41-001101
40*
50.8 15.24 17.7 Fig. 24
110-PP-640-41-001101
3 Sockets with soft brass pin series 110-..-...-..-005101,
please consult
42
53.3 15.24 17.7 Fig. 25
110-PP-642-41-001101
48*
60.9 15.24 17.7 Fig. 26
110-PP-648-41-001101
50
63.5 15.24 17.7 Fig. 27
110-PP-650-41-001101
52
66.0 15.24 17.7 Fig. 28
110-PP-652-41-001101
4 For DIL Sockets with closed frame insulators replace 110-...
by 210-... Please consult for available pin numbers
50
63.5 22.86 25.3 Fig. 29
110-PP-950-41-001101
52
66.0 22.86 25.3 Fig. 30
110-PP-952-41-001101
64
81.2 22.86 25.3 Fig. 31
110-PP-964-41-001101
Due to technical progress, all information provided is subject to change without prior notice.
129