STP-35AMP2.5 Datasheet, PDF (1/2 Pages) PowerVolt Inc. – The Power Supply for Stepping Motors

300 W Factory Road
Addison, IL 60101
StepperPower™
The Power Supply for Stepping Motors
Series: STP
● Fully compatible with Applied Motion Products (and other) stepping
motor drivers
● Integral motor (35Vdc) and logic (5Vdc ± 5%) power
● Space saving compact modules provide mounting studs for motor drivers
● Dual 120/240V switch-selectable input voltage
● Power-on LEDs, screw terminal connections
● Ideal for use with A.M.P step motor drives 1335, 2035, 2035 O, 3535,
3535 O, 3540M or 3540MO.
● Safety Agency Approvals STP Series:
− UL 1950, third edition, File #E181899.
− CSA, C22.2 No.950, File #E181899.
− CE Marked.
TO ORDER CALL
TEL: [phone]
FAX:[phone]
TOLL FREE: [phone]
EMAIL: [e-mail]
RoHS
Description :
The STP series of power supplies provide unregulated DC voltage for motor power and tightly regulated 5Vdc
power for logic circuitry. They are especially suitable for Applied Motion’s step motor drives model numbers
1335, 2035, 2035 O,3535, 3535 O, 3540M or 3540MO. The PC board and transformer are assembled on L-
shaped aluminum chassis with threaded (# 6-32) PEM nuts provided on the side for mounting drive module, thus
making an integral power and driver unit. LED’s indicate the power-on status of the motor and logic outputs.
Input and motor output are fuse protected to avoid damage due to short circuits. The 5V logic output is
electronically protected for overload and short circuit. The input is easily set to 120V or 240V with a slide
switch provided on the PC board.