TOP264-271 Datasheet, PDF (1/36 Pages) Power Integrations, Inc. – Integrated Off-Line Switcher with EcoSmart Technology for Highly Efficient Power Supplies

TOP264-271
TOPSwitch^®-JX Family
Integrated Off-Line Switcher with EcoSmart^® Technology
for Highly Efficient Power Supplies
Product Highlights
EcoSmart^® - Energy Efficient
AC
+
DC
• Energy efficient over entire load range
IN
OUT
-
• No-load consumption below 100 mW at 265 VAC
• Up to 750 mW standby output power for 1 W input at 230 VAC
High Design Flexibility for Low System Cost
• Multi-mode PWM control maximizes efficiency at all loads
• 132 kHz operation reduces transformer and power supply size
• 66 kHz option for highest efficiency requirements
• Accurate programmable current limit
• Optimized line feed-forward for line ripple rejection
• Frequency jittering reduces EMI filter cost
• Fully integrated soft-start for minimum startup stress
• 725 V rated MOSFET
• Simplifies meeting design derating requirements
D
V
TOPSwitch-JX
CONTROL
C
S
XF
Figure 1. Typical Flyback Application.
PI-5578-090309
Extensive Protection Features
• Auto-restart limits power delivery to <3% during overload faults
• Output short-circuit protection (SCP)
• Output over-current protection (OCP)
• Output overload protection (OPP)
• Output overvoltage protection (OVP)
• User programmable for hysteretic/latching shutdown
• Simple fast AC reset
• Primary or secondary sensed
• Line undervoltage (UV) detection prevents turn-off glitches
• Line overvoltage (OV) shutdown extends line surge withstand
• Accurate thermal shutdown with large hysteresis (OTP)
Advanced Package Options
• eDIP^™-12 package:
• Low profile horizontal orientation for ultra-slim designs
• Heat transfer to both PCB and heat sink
• Optional external heat sink provides thermal impedance
equivalent to a TO-220
• eSIP^®-7C package:
• Vertical orientation for minimum PCB footprint
• Simple heat sink mounting using clip provides thermal
impedance equivalent to a TO-220
• Extended creepage to DRAIN pin
• Heat sink is connected to SOURCE for low EMI
Description
TOPSwitch-JX cost effectively incorporates a 725 V power
MOSFET, high voltage switched current source, multi-mode
PWM control, oscillator, thermal shutdown circuit, fault
protection and other control circuitry onto a monolithic device.
Output Power Table
PCB Copper Area¹
Product⁵
TOP264VG
230 VAC ±15%⁴
Adapter²
Open
Frame³
21 W
34 W
85-265 VAC
Adapter²
Open
Frame³
12 W
22.5 W
TOP265VG
22.5 W
36 W
15 W
25 W
TOP266VG
24 W
39 W
17 W
28.5 W
TOP267VG
27.5 W
44 W
19 W
32 W
TOP268VG
30 W
48 W
21.5 W
36 W
TOP269VG
32 W
51 W
22.5 W
37.5 W
TOP270VG
34 W
55 W
24.5 W
41 W
TOP271VG
36 W
59 W
26 W
43 W
Product⁵
TOP264EG/VG
TOP265EG/VG
TOP266EG/VG
TOP267EG/VG
TOP268EG/VG
TOP269EG/VG
TOP270EG/VG
TOP271EG/VG
Metal Heat Sink¹
230 VAC ±15% ⁴
Adapter²
Open
Frame³
30 W
62 W
85-265 VAC
Adapter²
Open
Frame³
20 W
43 W
40 W
81 W
26 W
57 W
60 W
119 W
40 W
86 W
85 W
137 W
55 W
103 W
105 W
148 W
70 W
112 W
128 W
162 W
80 W
120 W
147 W
190 W
93 W
140 W
177 W
244 W
118 W
177 W
Table 1. Output Power Table.
Notes:
1. See Key Application Considerations section for more details.
2. Minimum continuous power in a typical non-ventilated enclosed adapter measured at +50 °C ambient temperature.
3. Minimum continuous power in an open frame design at +50 °C ambient temperature.
4. 230 VAC or 110/115 VAC with doubler.
5. Packages: E: eSIP-7C, V: eDIP-12. See Part Ordering Information section.
www.powerint.com
March 2010