TOP221P Datasheet, PDF (1/20 Pages) Power Integrations, Inc. – Three-terminal Off-line PWM Switch

®
TOP221-227
TOPSwitch-^®II Family
Three-terminal Off-line PWM Switch
Product Highlights
• Lowest cost, lowest component count switcher solution
• Cost competitive with linears above 5W
• Very low AC/DC losses – up to 90% efficiency
• Built-in Auto-restart and Current limiting
• Latching Thermal shutdown for system level protection
• Implements Flyback, Forward, Boost or Buck topology
• Works with primary or opto feedback
• Stable in discontinuous or continuous conduction mode
• Source connected tab for low EMI
• Circuit simplicity and Design Tools reduce time to market
Description
The second generation TOPSwitch-II family is more cost
effective and provides several enhancements over the first
generation TOPSwitch family. The TOPSwitch-II family extends
the power range from 100W to 150W for 100/115/230 VAC
input and from 50W to 90W for 85-265 VAC universal input.
This brings TOPSwitch technology advantages to many new
applications, i.e. TV, Monitor, Audio amplifiers, etc. Many
significant circuit enhancements that reduce the sensitivity to
board layout and line transients now make the design even
AC
IN
D
TOPSwitch
CONTROL
C
S
PI-1951-091996
Figure 1. Typical Flyback Application.
easier. The standard 8L PDIP package option reduces cost in
lower power, high efficiency applications. The internal lead
frame of this package uses six of its pins to transfer heat from
the chip directly to the board, eliminating the cost of a heat sink.
TOPSwitch incorporates all functions necessary for a switched
mode control system into a three terminal monolithic IC: power
MOSFET, PWM controller, high voltage start up circuit, loop
compensation and fault protection circuitry.
OUTPUT POWER TABLE
TO-220 (Y) Package¹
PART ^{Single Voltage Input 3}
ORDER ^{100/115/230 VAC ±15%}
NUMBER
P 4,6
MAX
Wide Range Input
85 to 265 VAC
P 4,6
MAX
TOP221Y
12 W
7W
8L PDIP (P) or 8L SMD (G) Package²
PART
ORDER
NUMBER
Single Voltage. Input³
100/115/230 VAC ±15%
P 5,6
MAX
Wide Range Input
85 to 265 VAC
P 5,6
MAX
TOP221P or TOP221G
9W
6W
TOP222Y
25 W
15 W
TOP222P or TOP222G
15 W
10 W
TOP223Y
50 W
30 W
TOP223P or TOP223G
25 W
15 W
TOP224Y
75 W
45 W
TOP224P or TOP224G
30 W
20 W
TOP225Y
100 W
60 W
TOP226Y
125 W
75 W
TOP227Y
150 W
90 W
Notes: 1. Package outline: Y03A 2. Package Outline: P08A or G08A 3. 100/115 VAC with doubler input 4. Assumes appropriate heat
sinking to keep the maximum TOPSwitch junction temperature below 100˚ C. 5. Soldered to 1 sq. in.( 6.45 cm²), 2 oz. copper clad
(610 gm/m²) 6. P is the maximum practical continuous power output level for conditions shown. The continuous power capability
MAX
in a given application depends on thermal environment, transformer design, efficiency required, minimum specified input voltage, input
storage capacitance, etc. 7. Refer to key application considerations section when using TOPSwitch-II in an existing TOPSwitch design.
December 1997