TNY274_09 Datasheet, PDF (1/24 Pages) Power Integrations, Inc. – Energy-Effi cient, Off-Line Switcher With Enhanced Flexibility and Extended Power Range

TNY274-280
TinySwitch^®-III Family
Energy-Efficient, Off-Line Switcher With
Enhanced Flexibility and Extended Power Range
Product Highlights
Lowest System Cost with Enhanced Flexibility
• Simple ON/OFF control, no loop compensation needed
• Selectable current limit through BP/M capacitor value
• Higher current limit extends peak power or, in open
frame applications, maximum continuous power
• Lower current limit improves efficiency in enclosed
adapters/chargers
• Allows optimum TinySwitch-III choice by swapping
devices with no other circuit redesign
• Tight I²f parameter tolerance reduces system cost
• Maximizes MOSFET and magnetics power delivery
• Minimizes max overload power, reducing cost of
transformer, primary clamp & secondary components
• ON-time extension – extends low line regulation range/hold-up
time to reduce input bulk capacitance
• Self-biased: no bias winding or bias components
• Frequency jittering reduces EMI filter costs
• Pin-out simplifies heatsinking to the PCB
• SOURCE pins are electrically quiet for low EMI
Enhanced Safety and Reliability Features
• Accurate hysteretic thermal shutdown protection with
automatic recovery eliminates need for manual reset
• Improved auto-restart delivers <3% of maximum power in short
circuit and open loop fault conditions
• Output overvoltage shutdown with optional Zener
• Line undervoltage detect threshold set using a single optional
resistor
• Very low component count enhances reliability and enables
single-sided printed circuit board layout
• High bandwidth provides fast turn on with no overshoot and
excellent transient load response
• Extended creepage between DRAIN and all other pins improves
field reliability
EcoSmart^®– Extremely Energy Efficient
• Easily meets all global energy efficiency regulations
• No-load <150 mW at 265 VAC without bias winding, <50 mW
with bias winding
• ON/OFF control provides constant efficiency down to very light
loads – ideal for mandatory CEC regulations and 1 W PC
standby requirements
Applications
• Chargers/adapters for cell/cordless phones, PDAs, digital
cameras, MP3/portable audio, shavers, etc.
• PC Standby and other auxiliary supplies
• DVD/PVR and other low power set top decoders
• Supplies for appliances, industrial systems, metering, etc.
+
Wide-Range
HV DC Input
D
EN/UV
TinySwitch-III
BP/M
S
-
Figure 1. Typical Standby Application.
+
DC
Output
-
PI-4095-082205
Output Power Table
230 VAC ± 15%
Product³
Adapter¹
Peak or
Open
Frame²
TNY274P/G
6W
11 W
TNY275P/G
8.5 W
15 W
TNY276P/G
10 W
19 W
TNY277P/G
13 W
23.5 W
TNY278P/G
16 W
28 W
TNY279P/G
18 W
32 W
TNY280P/G
20 W
36.5 W
85-265 VAC
Adapter¹
Peak or
Open
Frame²
5W
8.5 W
6W
11.5 W
7W
15 W
8W
18 W
10 W
21.5 W
12 W
25 W
14 W
28.5 W
Table 1. Output Power Table.
Notes:
1. Minimum continuous power in a typical non-ventilated enclosed adapter
measured at +50 °C ambient. Use of an external heatsink will increase power
capability.
2. Minimum peak power capability in any design or minimum continuous power in
an open frame design (see Key Applications Considerations).
3. Packages: P: DIP-8C, G: SMD-8C. See Part Ordering Information.
Description
TinySwitch-III incorporates a 700 V power MOSFET, oscillator,
high voltage switched current source, current limit (user
selectable) and thermal shutdown circuitry. The IC family uses an
ON/OFF control scheme and offers a design flexible solution with
a low system cost and extended power capability.
www.powerint.com
January 2009