|
PM50RL1B120 Datasheet, PDF (4/7 Pages) Mitsubishi Electric Semiconductor – INTELLIGENT POWER MODULES FLAT-BASE TYPE INSULATED PACKAGE | |||
|
◁ |
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com
PM50RL1B120
Intellimod⢠L1-Series
Three Phase IGBT Inverter + Brake
50 Amperes/1200 Volts
Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified
Characteristics
Symbol
Test Conditions
Min.
Thermal Characteristics, Tj = 25°C unless otherwise specified
Characteristic
Junction to Case Thermal Resistance
Inverter Part
Junction to Case Thermal Resistance
Brake Part
Contact Thermal Resistance
Symbol
Rth(j-c)Q
Rth(j-c)Dââ
Rth(j-c)Q
Rth(j-c)Dââ
Rth(c-f)
Condition
Min.
IGBT (Per 1 Element) (Note 1)
â
FWDi (Per 1 Element) (Note 1)
â
IGBT (Note 1)
â
FWDi (Note 1)
â
Case to Fin Per Module,
â
Thermal Grease Applied (Note 1)
Recommended Conditions for Use
Characteristic
Symbol
Condition
Supply Voltage
VCC
Applied across P-N Terminals
Control Supply Voltage**
VD
Applied between VUP1-VUPC,
VVP1-VVPC, VWP1-VWPC, VN1-VNC
Input ON Voltage
VCIN(on)
Applied between UP-VUPC,
Input OFF Voltage
VCIN(off) VP-VVPC, WP-VWPC, UN- VN- WN-Br-VNC
PWM Input Frequency
fPWM
â
Arm Shoot-through Blocking Time
tDEAD
Input Signal
* If you use this value, Rth(f-a) should be measured just under the chips.
** With ripple satisfying the following conditions: dv/dt swing ⤠±5V/µs, Variation ⤠2V peak to peak.
Typ. Max. Units
Typ. Max. Units
â
0.27* °C/Watt
â
0.47* °C/Watt
â
0.39* °C/Watt
â
0.67* °C/Watt
â
0.038 °C/Watt
Value
â¤800
15.0 ±1.5
Units
Volts
Volts
â¤0.8 Volts
â¥9.0 Volts
â¤20
kHz
â¥2.5
µs
4
03/10 Rev. 1
|
▷ |