PM150RSD120 Datasheet, PDF (4/6 Pages) Powerex Power Semiconductors – Intellimod™ Module Three Phase Brake IGBT Inverter Output (150 Amperes/1200 Volts)

Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 [phone]
PM150RSD120
Intellimod™ Module
Three Phase + Brake IGBT Inverter Output
150 Amperes/1200 Volts
Thermal Characteristics
Characteristic
Junction to Case Thermal Resistance
Inverter Part
Junction to Case Thermal Resistance
Brake Part
Contact Thermal Resistance
Symbol
R_th(j-c)Q
R_th(j-c)F
R_th(j-c´)Q
R_th(j-c´)F
R_th(j-c)Q
R_th(j-c)F
R_th(j-c´)Q
R_th(j-c´)F
R_th(c-f)
*T_C measured point is just under the chips.
**If you use this value, R_th(f-a) should be mesured just under the chips.
Condition
Min.
Each IGBT
—
Each FWDi
—
Each IGBT*
—
Each FWDi*
—
Each IGBT
—
Each FWDi
—
Each IGBT*
—
Each FWDi*
—
Case to Fin Per Module,
—
Thermal Grease Applied
Recommended Conditions for Use
Characteristic
Symbol
Condition
Supply Voltage
V_CC
Applied across P-N Terminals
Control Supply Voltage***
V_D
Applied between V_UP1-V_UPC,
V_N1-V_NC, V_VP1-V_VPC, V_WP1-V_WPC
Input ON Voltage
V_CIN(on)
Applied between U_P-V_UPC, V_P-V_VPC,
Input OFF Voltage
V_CIN(off)
W_P-V_WPC, U_N, V_N, W_N, B_r -V_NC
PWM Input Frequency
f_PWM
Using Application Circuit
Minimum Dead Time
t_DEAD
Input Signal
***With ripple satisfying the following conditions: dv/dt ≤ ±5v/µs, Variation ≤ 2V peak to peak.
Typ. Max. Units
—
0.16 °C/Watt
—
0.24 °C/Watt
—
0.10** °C/Watt
—
0.16** °C/Watt
—
0.30 °C/Watt
—
0.80 °C/Watt
—
0.22** °C/Watt
—
0.36** °C/Watt
—
0.018 °C/Watt
Value
0 ~ 800
15 ± 1.5
Units
Volts
Volts
0 ~ 0.8
4.0 ~ V_D
0 ~ 20
≥ 3.0
Volts
Volts
kHz
µS
4