PS431215 Datasheet, PDF (3/5 Pages) Powerex Power Semiconductors – POW-R-BLOK Single SCR Isolated Module 1500 Amperes / Up to 1800 Volts

®
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 [phone]
www.pwrx.com
PS43__15
POW-R-BLOK^TM
Single SCR Isolated Module
1500 Amperes / Up to 1800 Volts
Electrical Characteristics, T_J=25C unless otherwise specified
Characteristics
Symbol
Test Conditions
Min.
Max. Units
Repetitive Peak Forward Leakage Current
Repetitive Peak Reverse Leakage Current
Peak On-State Voltage
Threshold Voltage, Low-level
Slope Resistance, Low-level
Threshold Voltage, High-level
Slope Resistance, High-level
VTM Coefficients, Full Range
Critical Rate of Rise of Off-State
Voltage
Gate Trigger Current
Gate Trigger Voltage
Non-Triggering Gate Voltage
Holding Current
Peak Forward Gate Current
Peak Reverse Gate Voltage
Maximum Average Gate Power Dissipation
IDRM
IRRM
VTM
V(TO)1
rT1
V(TO)2
rT2
dV/dt
IGT
IG Required
VGT
VGDM
IH
IGTM
VGRM
PGM (AVE)
Up to 1800V, TJ=125C
Up to 1800V, TJ=125C
ITM=3000A, TJ=25C
TJ = 125C, I = 15%IT(AV) to πIT(AV)
TJ = 125C, I = πIT(AV) to ITSM
TJ = 125C, I = 50A to 15kA
VTM = A+ B Ln I +C I + D Sqrt I
Exponential to 0.67VDRM
Tj=125C, Gate Open
Tj=25C, VD=12V
Min Ig Required to Ensure Turn-On of
Paralleled SCRs in Module
Tj=25C, VD=12V
Tj=125C, VD= ½ VDRM
200
mA
200
mA
1.30
V
0.691
V
0.102 mΩ
0.871
V
0.065 mΩ
A=
0.7963
B = -3.77 E-02
C = 3.65 E-05
D = 7.19 E-03
600
V/s
400
mA
800mA
4.5
Volts
0.15 Volts
600
mA
8.0
Amp
5
Volts
60
Watts
Thermal Characteristics
Characteristics
Thermal Resistance, Junction to Case
Thermal Impedance Coefficients
Thermal Resistance, Case to Sink Lubricated
Symbol
R_ΘJ-C
Z_ΘJ-C
R_ΘC-S
Per Module, both conducting
Max.
0.024
Units
C/W
Z_ΘJ-C= K₁ (1-exp(-t/t₁))
+ K₂ (1-exp(-t/t₂))
+ K₃ (1-exp(-t/t₃))
+ K₄ (1-exp(-t/t₄))
Per Module
K₁ = 4.05 E-04
K₂ = 5.19 E-03
K₃ = 1.63 E-02
K₄ = 2.12 E-03
t₁ = 6.24 E-03
t₂ = 2.46 E-01
t₃ = 8.20
t₄ = 35.33
0.009
C/W
Revision Date: 05/29/2012