English
Language : 

CM20TF-24H Datasheet, PDF (2/4 Pages) Mitsubishi Electric Semiconductor – MEDIUM POWER SWITCHING USE INSULATED TYPE
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
CM20TF-24H
Six-IGBT IGBTMOD™ H-Series Module
20 Amperes/1200 Volts
Absolute Maximum Ratings, Tj = 25 °C unless otherwise specified
Ratings
Symbol
Junction Temperature
Storage Temperature
Collector-Emitter Voltage (G-E SHORT)
Gate-Emitter Voltage
Collector Current
Peak Collector Current
Diode Forward Current
Diode Forward Surge Current
Power Dissipation
Max. Mounting Torque M5 Mounting Screws
Tj
Tstg
VCES
VGES
IC
ICM
IF
IFM
Pd
–
Module Weight (Typical)
–
V Isolation
VRMS
* Pulse width and repetition rate should be such that device junction temperature does not exceed the device rating.
Static Electrical Characteristics, Tj = 25 °C unless otherwise specified
Characteristics
Symbol
Test Conditions
Collector-Cutoff Current
Gate Leakage Current
ICES
IGES
VCE = VCES, VGE = 0V
VGE = VGES, VCE = 0V
Gate-Emitter Threshold Voltage
Collector-Emitter Saturation Voltage
VGE(th)
VCE(sat)
IC = 2mA, VCE = 10V
IC = 20A, VGE = 15V
IC = 20A, VGE = 15V, Tj = 150°C
Total Gate Charge
QG
VCC = 600V, IC = 20A, VGS = 15V
Diode Forward Voltage
VFM
IE = 20A, VGS = 0V
** Pulse width and repetition rate should be such that device junction temperature rise is negligible.
Dynamic Electrical Characteristics, Tj = 25 °C unless otherwise specified
Characteristics
Symbol
Test Conditions
Input Capacitance
Output Capacitance
Cies
Coes
VGE = 0V, VCE = 10V, f = MHz
Reverse Transfer Capacitance
Cres
Resistive
Turn-on Delay Time
td(on)
Load
Rise Time
Switching
Turn-off Delay Time
Times
Fall Time
Diode Reverse Recovery Time
Diode Reverse Recovery Charge
tr
td(off)
tf
trr
Qrr
VCC = 600V, IC = 20A,
VGE1 = VGE2 = 15V, RG = 16Ω
IE = 20A, diE/dt = –40A/µs
IE = 20A, diE/dt = –40A/µs
Thermal and Mechanical Characteristics, Tj = 25 °C unless otherwise specified
Characteristics
Symbol
Test Conditions
Thermal Resistance, Junction to Case
Rth(j-c)
Per IGBT
Thermal Resistance, Junction to Case
Rth(j-c)
Per FWDi
Contact Thermal Resistance
Rth(c-f)
Per Module, Thermal Grease Applied
CM20TF-24H
–40 to 150
–40 to 125
1200
±20
20
40*
40
40*
250
17
260
2500
Units
°C
°C
Volts
Volts
Amperes
Amperes
Amperes
Amperes
Watts
in-lb
Grams
Volts
Min.
Typ.
Max. Units
–
–
1.0
mA
–
–
0.5
µA
4.5
6.0
7.5
Volts
–
2.5
3.4** Volts
–
2.25
–
Volts
–
100
–
nC
–
–
3.5
Volts
Min.
Typ.
Max. Units
–
–
4
nF
–
–
1.4
nF
–
–
0.8
nF
–
–
100
ns
–
–
200
ns
–
–
150
ns
–
–
350
ns
–
–
250
ns
–
0.15
–
µC
Min.
Typ.
Max. Units
–
–
0.63 °C/W
–
–
1.40 °C/W
–
–
0.058 °C/W
328