P1Z7AAR700W Datasheet, PDF (1/6 Pages) Powerex Power Semiconductors – Phase Control Modules (345-800 Amperes/400-3000 Volts)

Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 [phone]
POW-R-BRIK™
Phase Control Modules
345-800 Amperes/400-3000 Volts
OUTLINE DRAWING
MARKING: DEVICE
AND DIRECTION
ACCORDING TO CIRCUIT
CONFIGURATION CHART
C
G TAPPED HOLE
x 0.50 DEEP
TYP. 3 PLACES
CL
K1
X2
CL
L TYP. 4 PLACES
MARKING: K1
AI/K2 (ANODE)/(CATHODE),
AND A2 (ANODE) AS SHOWN
A2
DB
F
F
A
MARKING: STYLE NO. WITH DATE
CODE & MFG. LOCATION CODE
(CUSTOMER PART NO. OPTIONAL)
E Ø THRU HOLE TYP. 4 PLACES
(FOR TYP. 1/4-20 SOCKET HD. SCR.)
(& BELLEVILLE SPRING WASHER)
GATE (WHITE) & CATHODE
(RED) LEADS 12.5" LONG
WITH 0.375" LONG
STRIPPED ENDS
SENSOR (WHITE) LEADS
12.5 ±0.5" LONG WITH
0.375" IN LONG STRIPED ENDS
CASE ANODIZED PER
CL
MIL-A-8625, TYPE II
Outline Drawing
K
J
H
THIS SURFACE
MUST BE PROTECTED
AND NOT DAMAGED
Z7A Outline
Dimension
A
B
C
D
E
F
G
H
J
K
L
Inches
Millimeters
6.30
153.16
3.02
76.70
3.15
80.01
2.47
62.73
0.328 Dia. Dia. 8.33
1.83
46.48
5/16-18
5/16-18
UNC-2B
UNC-2B
1.27
32.25
2.09
53.08
2.25
57.15
0.56
14.22
Mounting Bolt (E) Torque Limit is 11 ft.-lb.
Electrical terminal (G) torque limit is 11 ft.-lb. for type
Z7A and 20 ft.-lb. for Z9A.
Apply a thin coating of thermal joint compound to heat
sink surface prior to module mounting.
Module weights: Z7A weighs 6 lbs. while the Z9A module
weighs 11 lbs.
If incoming tests are done for isolation voltage, the volt-
age should be applied in a slow manner rather than
abruptly imposed on the device. The voltage should be
applied between the top terminals, which must be shorted
together, and the metal case.
The metal case is anodized and provides added voltage
isolation capability if not damaged: factory hi-pot test is
achieved without the benefit of the anodized coating.
POW-R-BRIK™
Phase Control Modules
345-800 Amperes/400-3000 Volts
Z9A Outline
Dimension
Inches
Millimeters
A
7.50
190.50
B
3.70
93.98
C
3.15
80.01
D
3.15
80.01
E
0.328 Dia. Dia. 8.33
F
2.03
51.56
G
3/8-16
3/8-16
UNC-2B
UNC-2B
H
1.51
38.35
J
2.52
64.00
K
2.75
69.85
L
0.56
14.22
Ordering Information:
Select the complete thirteen digit
module part number you desire
from the Configuration Reference
Description.
Example: P3Z7ACT700W16 is a
1600 Volt, 375 Ampere Average,
Dual SCR POW-R-BRIK™ Module
with the standard thermistor.
Description:
Powerex POW-R-BRIK™ Modules
are designed for medium and high
current power control applications.
POW-R-BRIK™ Modules feature
an electrically isolated package
that simplifies system packaging,
installation and cooling.
POW-R-BRIK™ Modules utilize
Compression Bonded
Encapsulation (CBE) mounting
and double side cooling of the
semiconductor elements. The Z7A
outline POW-R-BRIK™ uses
33mm or 38mm elements and the
Z9A outline POW-R-BRIK™ uses
50mm elements. Standard circuit
configurations include Dual SCR,
Dual Diode, SCR/Diode, and
Diode/SCR. Additional circuit con-
figurations, e.g. Single Element,
Common Cathode, Common
Anode, and special element types,
e.g. Fast Switch SCRs, Fast
Recovery Diodes, GTOs, and
Transistors are available.
Features:
Ⅺ Electrically Isolated Packaging
Ⅺ Anodized Aluminum Housing
Ⅺ Internal Copper Contacting
Ⅺ Gold Element Contacting
Ⅺ Internal Temperature Sensor
Ⅺ Compression Element
Contacting
Applications:
Ⅺ AC Motor Starters
Ⅺ DC Motor Controls
Ⅺ Resistance Welding Controls
Ⅺ Mining Power Centers
Ⅺ High Voltage Motor Starters
Ⅺ Transportation Systems
P-1