PDI-2032-0 Datasheet, PDF (1/1 Pages) PowerDynamics, Inc – COIN CELL BATTERY HOLDER

6
5
MATERIAL AND FINISH:
Insulator: Nylon, color black, UL 94V-0 rated
Positive contact: See Table 1
Negative contact: Brass, Nickel plated
D _{ELECTRICAL SPECIFICATIONS}
Voltage & current rating: 3 VDC, 120 mA
Inter contact resistance: 100 mohm max. at both the positive
and negative terminals when measured between the terminals
of the PDI-2032 at 1 KHz with low drainage (100mA max.)
Insulation resistance: 100 Mohm min. with 500 VDC applied
between the positive and negative terminals.
Dielectric withstanding voltage: 500 VDC applied for one minute
between the positive and negative terminals.
MECHANICAL SPECIFICATIONS
Battery insertion force: 0.3kg-1.0kg for the initial battery
C ^insertion
Spring pressure: 50g min. initial contact force at positive and
negative terminals
Terminal strength: Electrical and mechanical performance
specifications should still be satisfied whithout terminal cracking
or excessive play, with a static load of 1kg applied to the
terminals in any direction; however, the terminals may bend.
4
3
2
1
PART NUMBER
PDI-2032-0
PDI-2032-1
PDI-2032-2
TABLE 3: BATTERY HOLDER SELECTION GUIDE
GE
UNION
PANASONIC
SANYO
CARBIDE
SAFT
VARTA
(EVEREADY) RAYOVAC
CR 2032
CR 2032
BR 2032
CR 2032
CR 2025
CR 2025
CR 2025
BR 2016
CR 2016
CR 2016
BR 2020 LM 2020
CR 2016
DURACELL
DL 2032
D
DL 2025
DL 2016
ONLY FOR
7.4
PDI-2032-1 AND
PDI-2032-2
3.3±0.5
3X Ø1.5 STAND OFFS
POSITIVE
6.5
6.2
CONTACT
C
20.5
27.3
16.5
6.5
2X 0.58
NOTES:
(1) 2032 size battery fits loosely into
MPD socket P/N BH906 with 3mm
(.118") diametrical clearance.
B
4 REMOVAL
SLOTS
2X Ø1.02±0.10
Ø20.4
Ø22.8
ONLY FOR
PDI-2032-0
NEGATIVE
CONTACT
2X 0.70
B
20.5
TABLE 2: CROSS REFERENCE CHART
PDI
NOMINAL
MEMORY
SAFT KEYSTONE S.E.I.
PART
BATTERY
PROTECTION
6.5
NUMBER
SIZE
DEVICES(MPD)
PDI-2032-0
(2032)
20.0 x 3.2
BH 906(1)
N/A
106
2S2032-0
RECOMMENDED
TOLERANCE
PCB LAYOUT
UNLESS OTHERWISE SPECIFIED
X±1
A
TOP VIEW
X.X ± 0.4
X.XX ± 0.20
Phone: [phone] Whippany, New Jersey
PART: COIN CELL
Fax: [phone]
A
TABLE 1
PART NUMBER
POSITIVE CONTACT MATERIAL
PLATING
DRAWN
BY
GQ
PDI-2032-0
PDI-2032-1
BERYLLIUM COPPER
PHOSPHOR BRONZE
NICKEL CHECK
NICKEL ^BY
TD
PDI-2032-2
BERYLLIUM COPPER
APPR
NICKEL BY
PB
DATE: ^03/20/02
DATE: ^05/08/02
DATE: ^05/08/02
BATTERY HOLDER
PDI-2032-X
PART #:
SHEET
1 of 1
SIZE: A
SCALE: NTS
B ^{ALL DIMENSIONS FOR REFERENCE ONLY}
DIMENSIONS ARE IN MILLIMETERS
REV:
6
5
4
3
2
1