HGN-369 Datasheet, PDF (1/2 Pages) PowerDynamics, Inc – IEC 60320 INLET SOCKET WITH VOLTAGE SELECT, FLANGE MOUNT

HGN-369 IEC 60320 INLET SOCKET WITH VOLTAGE SELECT, FLANGE MOUNT
MECHANICAL DIMENSIONS (Unit: mm)
27.0
63.0
100
Use only with a 250V Fuse
52.0+- ^0.1
2x 3.3x90 CSK
0.80 TYP.
FEATURES
The HGN-369 power entry modules are used in applications
having the ON/OFF switch on front side but main input at
the rear side. This series features an IEC Connector, voltage
selector for four different voltages (100V, 120V, 220V, 240V),
fuse holder for European 5 x 20mm or N. American 1/4” x 1
1/4” (3AG) fuse. The filter is enclosed in a metal housing to
ensure maximum protection from common-mode and
differential-mode interferences.
These filters are also available for Medical equipment
with low leakage current to comply with UL 544 & UL2601.
APPLICATIONS
Computer & networking equipment, Measuring & control
equipment, Data processing equipment, laboratory instruments,
Switching power supplies, other electronic equipment.
TECHNICAL DATA
• Rated Voltage: 125/250VAC
• Rated Current: 1A, 2A, 3A, 4A, 6A,
• Power Line Frequency: 50/60Hz
• Max. Leakage Current each
Line to Ground:
@ 250VAC 50Hz: 0.5mA, max
@ 250VAC 50Hz: 2µA*, max
• Hipot Rating (one minute)
Line to Ground: 2250VDC
Line to Line: 1450VDC
• Temperature Range: -25C to +85C
* Medical application
51.0
3.5
46.0
52.0+- ^0.1
46.5+- ^0.5
2x M3
20.5
7x 2.80
64.0
21.0+0.5
Specifications subject to change without notice. Dimensions (mm). See Appendix A for
recommended power cord. See PDI full line catalog for detailed specifications on power cords.
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: [phone]
e-mail: [e-mail] • www.powerdynamics.com
77