HGN-337 Datasheet, PDF (1/2 Pages) PowerDynamics, Inc – IEC 60320 INLET SOCKET WITH SWITCH AND A FUSE HOLDER, SNAP-IN MOUNT

HGN-337 IEC 60320 INLET SOCKET WITH SWITCH AND A FUSE HOLDER,
SNAP-IN MOUNT
MECHANICAL DIMENSIONS (Unit: mm)
52.0
40.0
0.80 TYP.
FEATURES
The HGN-337 power entry module feature a combination
IEC Connector, two pole on/off switch and fuse holder that
accepts both European 5 x 20mm or N. American
1/4” x 1 1/4” (3AG) fuse. The HGN-337 protects electronic
equipment from common-mode and differential-mode
interferences.
These filters are also available for Medical equipment with
low leakage current to comply with UL 544 & UL2601.
APPLICATIONS
Computer & networking equipment, Measuring & control
equipment, Data processing equipment, laboratory instruments,
Switching power supplies, other electronic equipment.
TECHNICAL DATA
• Rated Voltage: 125/250VAC
• Rated Current: 1A, 2A, 3A, 4A, 6A,
• Power Line Frequency: 50/60Hz
• Max. Leakage Current each
Line to Ground:
@ 250VAC 50Hz: 0.5mA, max
@ 250VAC 50Hz: 2µA*, max
• Hipot Rating (one minute)
Line to Ground: 2250VDC
Line to Line: 1450VDC
• Temperature Range: -25C to +85C
* Medical application
36.0
6.3 TYP.
55.0
3.00
49.0
49.5 ^+0.2
4X R1.5
A+0.2
36.5+0.2
RECOMMENDED
PANEL CUTOUT
Specifications subject to change without notice. Dimensions (mm). See Appendix A for
recommended power cord. See PDI full line catalog for detailed specifications on power cords.
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: [phone]
62
e-mail: [e-mail] • www.powerdynamics.com