C4800 Datasheet, PDF (3/3 Pages) Powerbox – AC input 1 or 3-phase, 47 - 400 Hz

Euro Series
EURO OPTION SPECIFICATIONS
PROGRAMMING / MONITORING- SERIES 6400
Programming of output voltage _{By external signal, 0-10Vdc}
e1
and current from 0-100%
including isolation
By external signal, 4-20mA
e2
Programming of output voltage ^{By 270° potentiometer}
eu3
from 0-100%
By 10 turn potentiometer
eu4
Programming of output current ^{By 270° potentiometer}
ei3
from 0-100%
By 10 turn potentiometer
ei4
Monitoring of output voltage _{By external signal, 0-10Vdc}
m1
and current from 0-100%
including isolation
By external signal, 4-20mA
m2
Remote on/off programming By external signal, 0-10Vdc
em1
and monitoring of output
voltage and current from
By external signal, 4-20mA
em2
0-100% including isolation Via RS232 and IEEE488
em3
Improved tolerance
Between reference (external
signal) and measured value /
between measured value and
tol
displayed signal: voltage 0.2%
and current 0.5%.
ENVIRONMENT
Option “t” (tropical protection):The unit is given additional protection by a heavy
coat of varnish on the printed circuit board(s) and components.
Option “c” (extended temperature range):The circuit is designed and tested for
operation at an ambient temperature as low as –40 °C.
Option “ms” (increased mechanical strength): Screws are secured by Locktite and
heavy components are fastened by ties and/or glue. Modules with the “ms” option
meet the standard EN61373 regarding shock and vibration.
MECHANICS
Standard mounting “Eurocassette” pluggable module for 19” sub-racks 84TE
Option “w” (wall mounting): Module is screwed against a mounting plate for
installation in a cabinet. The load connections are typically a terminal block.
Option “cha” (chassis mount) Module is designed for installation to a structure or
within cabinet. Screw type connectors are supplied with the module.
Option “din” (DIN rail mount) Module is designed for DIN rail mounting to a
structure or within Cabinet. Screw type connectors are supplied with the module.
Doc. No. PBC9 Rev.C 28-4-11