TAC-10-683 Datasheet, PDF (1/1 Pages) Powerbox – AC FILTER

TAC
AC FILTER
Features
• Ultra high attenuation type of common mode
noise from 150kHz to 1MHz.
• Three Phase 500Vac.
• Quick and easy push down terminal.
• Din rail installation type (Option).
Specification
INPUT
Voltage
Test voltage
(Terminal-mounting plate)
Isolation resistance
(Terminal-mounting plate)
OUTPUT
Current
Leakage current
Voltage drop
ENVIRONMENTAL
Safety agency approval
Temperature
Operating temperature
Storage temperature
Humidity
Vibration
Impact
STANDARDS
Safety
500Vac, 3 phase
2kVac (cutoff current = 100mA), 1 minute at room
temperature and humidity.
500Vdc, 100MW minute at room temperature and
humidity.
See table.
2.5mA/5.0mA max (125/250Vac, 60Hz)
1.5V max (TAC-04, TAC-06) 1.0V max (TAC-10,
TAC-20, TAC-30)
-25°C to 85°C (Refer to derating curve).
-40°C to 85°C (Refer to derating curve).
-40°C to 85°C
20% to 95% RH (Non-condensing)
10 to 55Hz, 19.6m/s2 (2G), 3min. Period, 1 hour
each X, Y and Z axis.
196.1m/s2 (20G), 11ms once each X, Y and Z axis.
UL1283, CSA C 22.2 No. 8 (C-UL), DIN EN133200
VDE0565 Teil3-1, ENEC.
Ordering Information
TAC
-10
-683
_
(1)
(2)
(3)
(4)
1. Model name
2. Rated current
3. Line to ground capacitor code
4. Options
D: Din rail installation type.
CODE
06
10
16
20
30
CURRENT
6A
10A
16A
20A
30A
CODE
683
LEAKAGE
CURRENT(INPUT
125/250V 60HZ)
2.5mA / 5.0mA max
LINE TO GROUND
CAPACITOR(NOMINAL
VALUE)
68000pF
Your dependable power partner – www.powerbox.com.au
145