SW1750A-1 Datasheet, PDF (1/5 Pages) Powerbox – 1.75-21KVA PROGRAMMABLE AC POWER SERIES

SW Series
1.75-21KVA PROGRAMMABLE AC POWER SERIES
Features
• Powerful wave shape and waveform creation
• Graphic LCD Display
• Powerful DSP2 waveform programming
• Flexibility in power ranges
• Large wave shape library
Product Overview
The Smart Wave (SW) series of AC power sources offers powerful waveform
creation for ATE and power line disturbance simulation testing. Three separate
arbitrary waveform generators enable the Smart Wave to create independent,
complex waveforms on all three phases simultaneously. The Smart Wave is
designed to meet waveform requirements including DC contents (up to 312V), low
distortion (THD 0.25% to 100Hz), low noise and ripple, plus full compliance testing
to EMC standards. At only 8-3/4 inches high for the SW 5250A, the Smart Wave
delivers the most power in the smallest package. It weighs only 127 pounds, and
offers the highest power density in the industry. The SW Series is expandable from
1.75kVA to 21kVA. Unlike other AC power sources, the Smart Wave delivers full
rated power to 45°C.
Features and Benefits
Powerful Wave Shape and Waveform CreationThe Smart Wave can easily create
fractional or multi-cycle dropouts, spikes, surges, sags and distorted waveforms
from the front panel. To simulate these complex real-world power occurrences,
the Smart Wave comes with a library of 50 built-in wave shapes of their own
design. Output voltages are created by adding amplitude, frequency and other
parameters to the wave shapes. The user can also create over 50 custom front
panel setups with all parameters included and store them for quick recall,
making the Smart Wave ideal for manual testing.
SEQUENCE PROGRAMMING
Complex sequence or event programming is easy with time or cycle based
transient segments. The sequence library is made up of a total of 1000 segments
stored as labeled sequences. A sequences of up to 100 segments using up to 32
different wave shapes, arranged in any combination, can be run at any one time
The 32 wave shapes can be selected from the 50 factory supplied and 50 user
created wave shapes. By setting the time or number of cycles for each
segments, the user can create waveform sequences that allow automatic testing
for most any standards.
AC AND/OR DC
A direct coupled, transformerless design allows AC and DC on separate phases
or on the same phase. The Smart Wave can be used as a true DC power supply.
High DC content waveforms (up to 312 volts) can be created with no de-rating
of output power, even with 100% reactive loads. This can eliminate the need
for a separate DC supply.
GRAPHIC LCD DISPLAY
Display The Smart Wave has a graphic LCD display for previewing and
confirming the waveforms before connecting the output to the load. The menus
are easy to follow with the overlay paging format. Users can select menus,
slew voltage and frequency with a handy knob on the front panel. Front panel
signal and sync outputs allow three phase scope viewing.
POWERFUL DSP2 WAVEFORM PROGRAMMING
Waveform programming is easily accomplished using the optional DSP PC
software. The software allows freehand creation of waveforms, using a mouse
or mathematical expressions. Real-world waveforms can be uploaded and
modified when using a digital scope. The waveforms can then be downloaded
to the Smart Wave via GPIB and output to exactly simulate real-world
conditions.
Your dependable power partner – www.powerbox.com.au
501