PUP30 Datasheet, PDF (1/3 Pages) Tumbler Technologies + TRUMPower – 25- 30 WATT SWITCHING POWER SUPPLIES

PUP 30-110
3 0 - 1 1 0 W A T T S SINGLE& MULTIPLE OUTPUT AC/DC GENERAL
Features
• Wide range of models
• Adjustable output voltage
• Single, dual, triple and quad output voltages
• Universal input
• Overcurrent protection
• Overvoltage protection
• UL, CSA, and CE approvals
• MEPS compliance
Specifications
INPUT
Input voltage
85–264Vac wide input
Frequency
47Hz–63Hz
Input current
PUP30: 0.80A @ 115V, 0.5A @ 230V
PUP55: 1.5A @ 115V, 0.9A @ 230V
PUP110: 3.2A @ 115VAC, 1.8A @ 230VAC
Isolation
Input – Output: 3000Vac
Input – Ground: 1500Vac
Output – Ground: 500Vac
Inrush current
15A @ 115V, 30A @ 230V
OUTPUT
Output voltage
See table
Output voltage adjustment V1 only – see table, ±10% on multi outputs
Output current
See table
Output power
PUP30 @ 30W
PUP55 @ 55W
PUP110 @ 110W
Ripple & noise
1% peak to peak
Line regulation
±0.5% over input range
Load regulation
See table
Transient response
Overvoltage protection
Max. deviation 4% recovering to 1% within
500µs after 25% load charge
Provided on V1 only. Set at 110%–132% of
nominal
Overcurrent protection
All outputs protected for short circuit conditions
Temperature coefficient
Holdup time
All outputs ±0.04% per °C
Typically 10mS at 110VAC
OPERATING
MTBF
100,000 hrs @ 25°C
Efficiency
65%–70%
Insulation resistance
10M from Output to Ground
PFD signal
Power fail detection optional on PUP110
ENVIRONMENTAL
Operating temperature
0°C to 50°C
Derating
Derate to 50% at 70°C
Storage temperature
-40°C to 85°C
Relative humidity
5%–95% non-condensing
STANDARDS AND APPROVALS
Office of energy
PUP30: N13637; PUP55: N13180
Safety
UL1950, CSA C22.2, EN60950
C-Tick
AS/NZS CISPR11 Group 1 Class A
EMC standards
EN61000-4-2, EN61000-4-3, -4, -5, -6, -8, -11
EMI standards
EN55022 level B, FCC level B, VCCI level B,
EN61000-3-2, EN61000-3-3
MECHANICAL
Input connector
Output connector
Dimensions
IEC320 socket
Various combinations of cord and plug available.
Consult our sales office
PUP30: 147x75x42mm
PUP55: 178x95x57mm
PUP110: 254x127x68mm
Weight
PUP30: 500g; PUP55: 700g; PUP110: 1.2kg
*For detailed data sheet and output Pin connections and connector type, call our
sales office
Your dependable power partner – www.powerbox.com.au
263