|
PUP150 Datasheet, PDF (1/2 Pages) Powerbox – 150 WATTS SINGLE OUTPUT AC/DC GENERAL | |||
|
PUP 150 Series
150 WATTS SINGLE OUTPUT AC/DC GENERAL
Features
⢠High Efficiency.
⢠Low ripple and noise.
⢠Short circuit protection.
⢠Overvoltage protection.
⢠Over power protection.
⢠Over temperature protection.
⢠100% burn-in at full rated load.
⢠Standby consumption less than 1.0W.
⢠MEPS compliance.
Specifications
INPUT
Input voltage
Frequency
Input current
Leakage current
Insulation
Inrush current
OUTPUT
Output voltage
Output current
Ripple & noise
Line regulation
Load regulation
Transient response
Overvoltage protection
Overcurrent protection
Temperature coefficient
Holdup time
100-264Vac.
47Hzâ63Hz
1.60A @ 115V, 0.8A @ 230V
150μA max. @ 115Vac. 60Hz.
250μA max. @ 230Vac. 50Hz.
Input â Output: 3000Vac
Input â Ground: 1500Vac
Output â Ground: 500Vac
No damage.
See table
See table
380mV p-p max.
±0.5% maximum at full load.
See table
Max. deviation 4% recovering to 1% within
500µs after 25% load charge
Provided on V1 only. Set at 110%â140% of
nominal.
All outputs protected for short circuit conditions
All outputs ±0.04% per °C.
Typically 3 ms at 110Vac.
OPERATING
MTBF
100,000 hrs @ 25°C.
Efficiency
88% minimum.
Power factor
>0.9
ENVIRONMENTAL
Operating temperature
0°C to 40°C.
Storage temperature
-20°C to 85°C
Relative humidity
10%â95% non-condensing
STANDARDS AND APPROVALS
Safety
C-Tick
UL60950-1, CSA C22.2 No. 60950, Nemko
EN60950: 2000 (pending)
AS/NZS CISPR11 Group 1 Class A
EMC standards
EN55024, EN55022-B, FCC-B, VCCI-B, EN61000-3-
2, -3, EN61000-4-2, -3, -4, -5, -6, -8, -11.
MECHANICAL
Dimensions
171x72x40mm
Weight
0.8kgs approx.
268
|
▷ |