PSC150 Datasheet, PDF (1/4 Pages) Powerbox – 100 - 240 WATTS DC/DC SINGLE MULTI OUTPUT

PSC150 & 240 Series
100-240 WATTS DC/DC SINGLE MULTI OUTPUT
Features
• Very wide input range
• Convection cooled
• Operating temperature to 70°C
• Meets IP30
• Conformal coated
• IEC1000-4-4, EN55022-3
• IEC950, EN60950
Specifications
INPUT
Nominal Voltage
See selection chart
Current at No Load (max) 3W–5W
Protection
Fuse on board, reverse voltage protection
Isolation
4000VAC
EMC
Soft Start
EN55011/EN55022
Level B
Yes with inrush current limit
OUTPUT
Power
50W, 80W, 100W, 150W, 200W and 240W
Voltage Adjustment
-10% to +10%
Current Limit
105%
Ripple & Noise pk-pk
10mV pk-pk typical
Regulation
Line: 0.2% L1 to H1; Load: 0.2% NL to FL
Temperature Coefficient 0.02% per °C
Transient Response
10% up to 100% typical <2mS
Overvoltage Protection parallel diode
Reverse Voltage Protection Option
Short Circuit Protection Yes
Overload Protection
Yes
OPERATING
Efficiency
Single outputs 79%–95% typical
Multi outputs 75%–85% typical
Parallel Operation
Single outputs only (derate power by 10%)
Series Operation
Yes
ENVIRONMENTAL
Operating Temperature -20°C to +70°C (PSC50/80 – 5V only +55°C)
Storage Temperature
-40°C to +85°C
Derating
No
Cooling
Convection
STANDARDS AND APPROVALS
Safety Standards
IEC950, IEC 60950
C-Tick
AS/NZS CISPR11: 2002 Group1 Class A
EMI standards
EN55011/EN55022, EN61000-6-3
EMC standards
EN61000-6-2, EN/IEC61000-4-4, EN61000-4-5
MECHANICAL
Case
Dimensions
Connectors
Eurocassette
See drawing examples. Consult sales office for full
details
15 Pole DIN standard 41612 H15
OPTIONS
A – Overvoltage protection (OVP)
A built in SCR thyristor short circuits the output when an overvoltage
occurs. The trigger voltage is 15% higher than the nominal output
voltage.
C – Series diode on output
For parallel redundant applications built in series diodes can be
provided. The output power may be derated depending upon the model.
E1 – 2.5kVAC isolation between input/output and input/case.
On 24 & 48V inputs. The emission level incrases to level A.
E2 – Same as E1 but also 2.5kVAC between output/case.
L – Front panel for eurorack 10, 12, 14 TE
K1 – Input diode in series
K2 – Built in glass fuse on PSC80, PSC100 and PSC150
M – Inrush current limit with NTC-resistor on D-input
N – Wall mounting brackets
H15S– H15 female screw connector
O – Rear Eurorack mounting brackets
S – Remote sense
NTC – Inrush current limit with NTC
Input - Mobile application, consult sales
Your dependable power partner – www.powerbox.com.au
415