PSC06 Datasheet, PDF (1/2 Pages) Powerbox – 1 0 0 0 - 6 0 0 0 WAT T S 2 U U LT R A C O M PA C T B AT T E R Y C H A R G E R S

PSC06 Series
1000 - 6000 WATTS 2U ULTRA COMPACT BATTERY CHARGERS
FEATURES
• 1000W - 6000W
• Configurable Battery Charging System
• 2U 19" Rack Mounting
• Network Monitoring
• N+1 Operation
• Fully Featured Telecom Grade Rectifier
SPECIFICATIONS
INPUT
AC input
Frequency range
Power factor
Termination
DC OUTPUTT
Nominal voltage
Rated system output
power
Polarity
DC DISTRIBUTION
Load
Battery
Breaker fail detection
240V AC (90-300V) Single phase or 415V AC
Three phase (shelf type dependant)*
45-66 Hz
>0.99 full load
Single phase, 6 - 10mm² L, N, E tunnel terminals*
Three phase, 6 - 10 mm² L1,L2,L3,N,E terminals *
(Single phase by linking line terminals)
48V (+48V or +24V optional)*
6-8k Watts @ -48V (refer to table)
3-4k Watts @ 24V
Positive earth,
(negative earth option available)*
Standard Shelf configuration.
(Customized configuration available)*
Standard Shelf configuration
(Customized configuration available)*
Electronic fail detection on both load
and battery breakers
DC terminals
Rear Connect DIN Rail
Load
Tunnel terminals 6 mm² to 16mm²*
Battery
Tunnel terminals 35mm²*
Low voltage disconnect See Standard Shelf configuration.
ENVIRONMENTAL REQUIREMENTS
Ambient Temperature -20ºC to +70ºC
Storage Temperature -30ºC to +85ºC
Humidity
5-95% RH (non-condensing)
Altitude
<2,500m at full power
MECHANICAL
Dimensions
W, H, D
482.6mm (19” mount), 89.0mm (2U), 390.0mm
Weight
9kg (excluding rectifier modules)
Shipping Dimensions
W, H, D
540.0mm, 150.0mm, 435.0mm
Shipping Weight
10.5kg (excluding rectifier modules)
MONITORING & CONTROL
Display
Multi-lingual alpha numeric backlit display
Communications
Serial: 1x USB port on front panel for local PC interface
TCP/IP: Ethernet interface for communication using
SNMP protocol and internal web based configurator*
Modbus: Supported via TCP/IP*
LED Indicators
Green: Power on/monitor OK
Yellow: Non urgent alarm
Red: Urgent alarm
Audible
90dBA buzzer mappable to user defined conditions
Controls
3x push buttons for parameter setting or viewing on
front panel
Signal Inputs
Serial bus for rectifier control and interface to
peripheral modules
6x digital inputs
2x temperature sensors (one fitted by default)
Alarms
6x alarm relays, 5x of which can be mapped for
customised alarm settings
Alarm Contacts
0.3A 100V volts free changeover contacts
Logging Capacity
Periodic log, 16,384 records (dependant on number of
parameters logged)
Event log, 16,384 records (dependant on number of
parameters logged)
Connections
Relay outputs, mini combicon to accept 1.5mm² wire
USB port, USB mini B
*TCP/IP and modbus options only available with SM36 supervisory module.
CONFIGURATION AND OPTIONS
Rectifiers
RM2048XE: 2.0kW modular rectifier, 230V AC input,
48V DC output, 41.7A maximum output
RM2048HE: 2.0kW modular rectifier, 230V AC input,
48V DC output, 41.7A maximum output
RM2048/24: 2.0kW modular rectifier, 230V AC input,
48 or 24V DC output, 41.7A maximum output
RM1860/48: 1.8kW modular rectifier, 230V AC input,
60 or 48V DC output, 30.0A maximum output
Supervisory Modules
SM35: standard monitor featuring full temperature
compensation, automated and manual battery
testing/equalisation
SM36: enhanced monitor featuring full temperature
compensation, automated and manual battery
testing/equalisation with TCP/IP
ARBP-1M
Metal rectifier blanking panel
ASM-ABM24(-24-48-60)
Battery condition monitor for 24, 48 or 60V battery
strings
ASM-AC3P
AC mains monitor
1
Doc. No. PSC06 Series Rev.C 28-9-15
Powering Progress