|
PMP90 Datasheet, PDF (1/2 Pages) Powerbox – 60 - 90 WATTS SINGLE OUTPUT AC/DC MEDICAL - PRELIMINARY | |||
|
PMP90 Series
60-90 WATTS SINGLE OUTPUT AC/DC MEDICAL - PRELIMINARY
Features
⢠Low safety ground leakage current.
⢠Overvoltage protection.
⢠Overcurrent protection.
⢠100% burn-in at full rated load.
⢠Approved to IEC60950-1 and IEC60601-1.
Specifications
INPUT
Input Voltage
Frequency
Input Current
Leakage current
Isolation
Inrush Current
OUTPUT
Output Voltage
Output Current
Ripple & Noise
Line Regulation
Load Regulation
Transient Response
Overvoltage Protection
Overcurrent Protection
Temperature Coefficient
Holdup Time
90-264Vac
47Hzâ67Hz
1.20A (rms) for 115Vac.
0.60A (rms) for 230Vac.
90µA max. @ 115Vac. 60Hz.
150µA max. @ 230Vac. 50Hz.
Input â Output: 4000VAC
Input â Ground: 1500VAC
Output â Ground: 500VAC
60A @ 115V, 120A @ 230V
See table
See table
2% peak to peak
±0.5% maximum at full load.
See table
Max. deviation 4% recovering to 1% within 500µs
after 25% load charge
Provided on V1 only. Set at 110%â140% of
nominal.
All outputs protected for short circuit conditions
All outputs ±0.04% per °C.
Typically 15ms at 110VAC.
OPERATING
MTBF
150,000 hrs @ 25°C
Efficiency
78-84% minimum.
ENVIRONMENTAL
Operating Temperature
0°C to 60°C
Derating
Derate to 50% at 60°C
Storage Temperature
-40°C to 85°C
Relative Humidity
5%â95% non-condensing
STANDARDS AND APPROVALS
Safety standards
UL2601-1, CSA C22.2, TUV EN60601-1
C-Tick
AS/NZS CISPR11 Group 1, Class A
EMC standards
EMI standards
EN60601-1-2: 2001,EN61000-3-2, -3,
EN61000-4-2, -3, -4, -5, -6, -8, -11
EN55011 Class B, FCC Class B, VCCI Class B
MEPS compliance
TBC
MECHANICAL
Dimensions
130x76x43.7mm
Weight
0.65kgs approx.
Your dependable power partner â www.powerbox.com.au
363
|
▷ |