PM650 Datasheet, PDF (1/3 Pages) Powerbox – 650 - 700 WATTS SINGLE & MULTIPLE OUTPUT AC/DC MEDICAL

PM650 Series
650-700 WATTS SINGLE & MULTIPLE OUTPUT AC/DC MEDICAL
Features
• EN61000-3-2 class A and D compliant.
• Power factor 0.98 typical.
• Remote sense on output 1 and output 2.
• Overvoltage protection.
• Overcurrent protection.
• Power fail detection (PFD) signal.
• 100% burn-in at full rated load.
• Remote inhibit - TTL high disables output.
• Short curcuit protection
• Thermal protection.
Preliminary
Specifications
INPUT
Input Voltage
Frequency
Input Current
Leakage current
Isolation
Inrush Current
OUTPUT
Output Voltage
Output Current
Ripple & Noise
Line Regulation
Load Regulation
Transient Response
Overvoltage Protection
Overcurrent Protection
Temperature Coefficient
Holdup Time
PFD Signal
Remote inhibit
90-264Vac
47Hz–67Hz
7.1A (rms) for 115Vac.
3.5A (rms) for 230Vac.
100µA max. @ 115Vac. 60Hz.
165µA max. @ 230Vac. 50Hz.
Input – Output: 4000VAC
Input – Ground: 1500VAC
Output – Ground: 500VAC
40A @ 115V, 80A @ 230V
See table
See table
2% peak to peak
±0.2% maximum at full load.
See table
Max. deviation 4% recovering to 1% within
500µs after 25% load charge
Provided on V1 only. Set at 115%–140% of
nominal.
All outputs protected for short circuit conditions
All outputs ±0.04% per °C.
Typically 12ms at 110VAC.
Power fail detection signal. TTL logic low upon
loss of input power.
Requires an external TTL high level signal to
inhibit outputs for standard models.
OPERATING
MTBF
300,000 hrs @ 25°C
Efficiency
70% minimum.
ENVIRONMENTAL
Operating Temperature
0°C to 70°C
Derating
Derate to 50% at 70°C
Storage Temperature
-40°C to 85°C
Relative Humidity
5%–95% non-condensing
STANDARDS AND APPROVALS
Safety standards
UL2601-1, CSA C22.2, TUV EN60601-1
C-Tick
AS/NZS CISPR11 Group 1, Class A
EMC standards
EN60601-1-2: 2001,EN61000-3-2, -3,
EN61000-4-2, -3, -4, -5, -6, -8, -11
EMI standards
EN55011 Class B
MECHANICAL
Dimensions
266.7x127x63.5mm
Weight
TBA.
Your dependable power partner – www.powerbox.com.au
353