PBSP-110I Datasheet, PDF (1/1 Pages) Powerbox – 110VDC, 2500 WATTS RAILWAY DC/AC INVERTER

PBSP-110I Series
110VDC, 2500 WATTS RAILWAY DC/AC INVERTER
Features
• Halogen free low smoke Radox cabling.
• ELCB on output, high gauge earthing system.
• High temperature operation with derating.
• 110Vdc input, 240Vac, 50Hz, 2.5KVA output.
Specifications
INPUT
Voltage
96-148Vdc
Current
40mA standby, 27A (96Vdc input), 74A max.
Under voltage cut-out
96Vdc.
Under voltage re-set
106Vdc.
Over voltage cut-out
148Vdc.
Over voltage re-set
145Vdc.
Input protection
Via 10kA MCB as per AS3111.
OUTPUT
Voltage
240Vac ±5%
Frequency
50Hz ±5%
Total harmonic distortion 3%
Surge power
6.5kVA max.
Output overload and short
circuit protection
Output protection
Shutdown, auto restart after 60 secs.
Via 20A MCB / RCD as per AS3111 / AS3190.
Output neutral connected to inverter chassis earth
on inverter side of MCB / RCD.
Over temperature protection Shutdown, auto restart.
OPERATING
Efficiency
Isolation
ENVIRONMENTAL
Operating temperature
Cooling
90%–95% load dependent.
Input – Output: 4250VAC
Input – Ground: 1700VAC
Output – Ground: 2250VAC
0°C to 50°C at full load. Derate to 65°C at
reduced duty cycle.
Internal thermostatically controlled fan.
Shock and vibration
Unit has been mechanically strengthened.
Relative Humidity
95% non-condensing
STANDARDS AND APPROVALS
EMC
EN50121-3-2:2000.
C-Tick
MECHANICAL
AS/NZS2064:1997 Group 1 Class A
Dimensions
490x300x235mm
Weight
30kgs.
Enclosure
Wiring
Mounting
Powder coated aluminium.
All internal wiring uses Radox 125 halogen free
low smoke cable.
Suitable for vertical or horizontal mounting.
DC input connector
MS3102-E28-22P-F80 Mil grade connector.
AC output connector
MS3102-R18-10S-F80 Mil grade connector.
Please refer to PBSP 740 spec for mechanical drawings.
Your dependable power partner – www.powerbox.com.au
397