PBMPLS-12U-RM Datasheet, PDF (1/2 Pages) Powerbox – 500-5000 WATTS DC/AC INVERTER

PBMPLS-RM Series
500-5000 WATTS DC/AC INVERTER
Features
• True sinewave waveform.
• Massive inrush and overload capability.
• Galvanically isolated.
• High efficiency toroidal transformer.
• DC circuit breaker/ BATT isolator switch
• Rack mounted design.
• LED status indicators.
Specifications
INPUT
Voltage
Voltage range
12, 24, 48, 96, 120 (Standard). 36, 72, and others
(Also available).
-20% to +45% of nominal.
OUTPUT
Voltage
230Vac ±4% (Standard). 110Vac ±4% (Option).
Frequency
50/60Hz ±0.1
Output waveform
True sinewave < 4% THD.
Power factor correction All conditions.
Crest factor
>4
Load start sensitivity
0-20W
DC to AC isolation
3500V
Over-load protection
Yes.
Over-temperature protection Yes.
Short circuit protection
Yes.
BATT under and over voltage Yes.
protection
LED status indicators
ON, standby mode, over-temperature, over-load,
BATT under voltage, BATT over-voltage.
OPERATING
AC Outlet
Screw terminal junction box.
Battery Leads
Heavy duty low loss battery leads.
Dimensions
19”, 3RU x 350mm (D) – all models.
Cooling
Thermostatically controlled 2-speed fan.
STANDARDS AND APPROVALS
Safety standards
AS3100, AS3000
C-tick
AS/NZS CISPR14, AS/NZS 1044
EMC standards
AS2279, AS3000, AS3100 and EN55014
ENVIRONMENTAL
Temperature Range
-10°C to 50°C, derate above 40°C by 10%
Options
CODE
L
O
KX
V
J
B
D
G
R
H
L
C
D
ADD OPTION TO THE END OF INVERTER
PART NUMBER
Alarm output – Voltage free contacts.
Transfer alarm.
Automatic AC transfer switch with voltage sensing.
110Vac output.
Psophonometric noise to ETS 3000132-2
(Available only on 48Vdc, 1800W to 3500W models)
High voltage isolation 2kV AC RMS 1 minute
RCD/Earth leakage
Mil spec conformal coating
Ruggedisation for high vibration environment.
Frequency 60Hz
“AC OK” alarm relay contact
Twin switched GPO
Twin switched RCD GPO
Anderson 175 Amp connectors battery leads
Anderson 120 Amp connectors battery leads
Anderson 75 Amp connectors battery leads
452